2xxx Series Aluminum Alloys Forging Performance Analysis | ʻO kēia

Ke kū nei au ma ka ʻaoʻao o nā mīkini paʻi forging no nā makahiki he kanakolu.

Ua nānā au i ka 2xxx alumini e puka mai ana mai loko mai o ka umu ʻalani ʻālohilohi, e hele malalo o ka hamare, a puka mai ma ke ʻano he ʻāpana ʻupena nani a i ʻole he māhā, ʻāpana ʻōpala e hoʻi pololei i ka pahu remelt.

ʻO ka ʻokoʻa ma waena o kēlā mau hopena ʻelua ʻaʻole laki. ʻO ka hoʻomaopopo ʻana i ka mea a 2xxx alumini e makemake ai, pehea ka hana ma lalo o ka hāmare, a ma kahi o kona mau palena.

Ma kēiaʻatikala, E hele au iā ʻoe ma o ka ka hana ʻana i ka hana o 2xxx series alumini alumini mai kahi hana, kuanauna hale kūʻai.

E uhi mākou i ka mea 2xxx, no ke aha ke ʻano o kona ʻano, kona ʻano mekini a me ke kino, hiki ke hoʻopaʻa ʻia, hana puka makani, ʻO ka mālama wela, pilikia ʻino, nā noi maʻamau, a ʻo nā hewa aʻu i ʻike ai i hana ʻia e nā hale kūʻai ʻike.

1. He aha nā 2xxx Series Aluminum Alloys?

ʻO ka moʻo 2xxx ka ʻohana aluminika keleawe. ʻO ke keleawe ke kumu mua, ma mua 3.5% i 5%.

Nā hoʻohui liʻiliʻi o ka magnesium, mang kāne, 'Eron, Silikino, a i kekahi manawa hoʻomaʻemaʻe ka zirconium a i ʻole titanium i ka hale a hoʻomaikaʻi i nā waiwai.

No ka mea, hoʻonui nui ke keleawe i ka ikaika, Ua loaʻa i kēia ʻohana ka inoa "alumini paʻa aiʻole "duralumin" ma ka palapala kahiko.

E like me 6xxx a me 7xxx, 2ʻO nā huila xxx ʻO ka wela-mālama. Hiki ke hoʻoikaika i ka ikaika i nā pae kiʻekiʻe loa.

ʻO nā māka maʻamau āu e hālāwai ai ma nā hale kūʻai forging:

ʻO kahi ʻenehana koʻikoʻi ʻo 2A12, 2024, a 2014 ʻAʻole pono e mālama ʻia e like me nā mea hoʻololi, ʻoiai ua pili lākou i ka ʻohana alloy hoʻokahi.

ʻO kā lākou mau haku mele, Nā Pīkuhi Propertinies, kūlana mālama wela, a ʻokoʻa nā kūlana kūpono.

No laila, pono e hoʻomaopopo ka kikoʻī pololei i ka huikau pololei, hua huahana, huhū, a me ka hoʻokele waiwai maʻamau.

2. Papa Hana Hana o 2xxx Series Aluminum Alloys

2Loaʻa i nā ʻāpana xxx kahi moʻolelo hoʻokō maopopo loa. ʻO kā lākou pōmaikaʻi nui ka ikaika, ka ikaika ikaika-i-paona, markinpalibility, a me ka hana pono i kekahi mau noi wela kiekie.

ʻO kā lākou mau palena nui ʻo ia ka pale ʻana i ka corrosion a me ka weldability fusion.

Ikaika ikaika

ʻO ka ikaika kiʻekiʻe ke kumu mua e noʻonoʻo ai ka mea ʻenekinia i kahi alloy 2xxx.

Ma muli o ka papa kikoʻī, huhū, a me ke ʻano huahana, 2Hiki i nā ʻāpana xxx ke hāʻawi i nā ikaika tensile i ka 400–500+ MPa laulā, ʻoiai hiki i kekahi mau mea ʻoi aku ka ikaika o ka huhū a me nā alloys ke piʻi i nā waiwai kiʻekiʻe.

ʻo kahi laʻana, he maʻamau 2A12-T4 hiki i ka huahana ke loaʻa ka ikaika tensile ma kahi o ka 400-450 MPa

Pono kēia mau helu no ka hoʻohālikelike ʻenehana, akā, ʻaʻole pono e mālama ʻia lākou ma ke ʻano he mau waiwai āpau.

Pono e lawe mau ʻia nā waiwai mechanical i hōʻoia ʻia mai ka ʻōlelo kikoʻī pili.

ʻO ka mea koʻikoʻi, ʻo ka 2xxx alloys e noho i kahi kūlana kūpono ma waena o ka alumini hoʻolālā kumu nui a me nā māka 7xxx ikaika loa..

Paipai ikaika-a-kaumaha

Hiki i kahi mea hana 2xxx ke hoʻolako i ka hana hoʻolālā kiʻekiʻe me ka ʻole o ka hoʻopaʻi paʻa o ke kila.

He mea maikaʻi kēia i ka ʻohana alloy ke kaulike nā ʻenekinia:

Ikaika + Ke kaumaha + Nui o ka pauku + Markinpalibility

ʻO nā noi maʻamau e pili ana i nā pono aerospace, nā pale ikaika kiʻekiʻe, nā hoʻohui hale, a me nā mea ʻē aʻe kahi mea nui e hoʻemi ai i ka nuipaʻa.

ʻO ke kaʻina hana forging e hoʻohui i kahi pono ʻē aʻe ma ka ʻae ʻana i nā mea e hoʻopaʻa ʻia a puni nā ala hoʻouka nui ma mua o ka hoʻomaka ʻana me kahi poloka paʻa a me ka mīkini ʻana i ka hapa nui o ia mea..

Hoʻohana ʻia i ka hana wela hoʻokiʻekiʻe

ʻOi aku ka maikaʻi o ka paʻa ʻana o ka ikaika o kekahi mau mea hao 2xxx ma nā wela haʻahaʻa haʻahaʻa ma mua o nā mea hao 6xxx kumu nui..

ʻO kēia kekahi kumu i hoʻohana ʻia ai kekahi mau māka 2xxx i nā mokulele a me nā noi pili ʻenekini.

Akā naʻe,, pono e makaʻala ka ʻenekinia akamai i ka ʻōlelo “alumini wela wela”.

2ʻO nā ʻāpana xxx he mau alumini alumini, a emi iho ko lakou ikaika i ka pii ana o ka wela.

ʻO ka hiki ʻana o ka wela lawelawe ma ke ʻano kikoʻī, huhū, pae kaumaha, manawa hōʻike, a me nā pono mechanical pono.

No kahi ʻāpana maoli, ʻo ka nīnau hoʻolālā kūpono:

He aha nā waiwai e paʻa ai kēia huila a me ka wela i ka mahana hana maoli?

Palapala maikai

2ʻano paʻakikī a ʻano palupalu ʻo xxx. Nahaha maʻemaʻe nā ʻōpala. He haʻahaʻa ka lole hana. Maikaʻi ka hoʻopau ʻana o ka ʻili.

Inā ua hana ʻoe i ka mīkini 5056 a i ʻole kahi huila gummy 5xxx, ʻike ʻoe i ke ʻano o ka "sticky aluminika" - ʻo 2xxx ka ʻokoʻa.

ʻO kēia ke kumu i koho ʻia ai ʻo 2xxx no nā ʻāpana e koi ana i ka hoʻopau ʻana o CNC ma hope o ka hoʻopaʻa ʻana.

3. ʻO nā palena nui: ʻO ka ʻino a me ka welding

Kūleʻa ʻino-a-ʻino

Noho ke keleawe a me ka alumini i nā mana electrochemical like ʻole.

Hiki i ka alumini keleawe kiʻekiʻe ke kū i ka corrosion intergranular a me ka lua i loko o ka humid, hale paakai, a iʻole nā ​​wahi moana. 2ʻOi aku ka haʻahaʻa o xxx ma mua o 5xxx a me 6xxx i ka pale ʻana i ka corrosion o ka lewa.

No waho, kailoa, lawelawe pulu, 2Pono e pale ʻia ʻo xxx—anodizing, kukupupuole, Kāleka, a i ʻole ka uhi—a pono ke kaʻawale galvanic ma kahi e pili ai i ke kila, liulaala, a iʻole nā ​​kila kila.

Limit Limita

2ʻAʻole ʻo xxx he ʻohana wiliwili. ʻO ka wili fusion kuʻuna maʻamau e hana i ka māwae a me ka hoʻemi ʻana i ka ikaika weld.

No nā hale welded, 5ʻO xxx a i ʻole 6xxx ka mea maʻamau. 2Hoʻohui pinepine ʻia nā ʻāpana xxx me ka hoʻopaʻa ʻana i ka mīkini, riving, a iʻole ka hoʻopiliʻana.

4. Hiki ke hoʻopaʻa ʻia ka alumini 2xxx?

ʻAe, 2xxx series alumini alumini hiki ke hoʻopaʻa ʻia, a ʻo ka hapa nui o lākou he mau mea hoʻoheheʻe maikaʻi ʻia.

Akā ma hope o nā makahiki a puni alumini kalai kuʻi, E hāʻawi wau i hoʻokahi ʻōlelo aʻo maʻalahi: mai hana like me 2xxx 6061 aluminum.

2ʻOi aku ka nui o ke kūpaʻa deformation a ʻoi aku ka maʻalahi o ka hana ʻana i ka mahana a me nā kūlana deformation.

ʻO ka puka aniani kaʻina no laila ʻaʻole kala ʻia.

Ina he anu loa ka billet, lilo ka mea paʻakikī i ka neʻe ʻana a paʻakikī a piha ʻole paha ka piha. Inā wela loa a paʻa lōʻihi paha, hiki ke poino microstructural.

ʻO ka Forging Hot ke Alanui Nui

No ka nui o nā noi forging 2xxx, hoʻopaʻa ʻia i ka hana ʻana wela ʻo ia ke ala hana hana kūpono.

Ma ke ʻano he kuhikuhi kaʻina hana ākea, nā wela forging mua no nā mea hao e like me 2014, 2A12, a 2024 aia ma kahi kokoke i 430–460°C,

me ka laulā hana maoli i hoʻoholo ʻia e ka huila kikoʻī, nui billet, Pūʻulu Laina, make manao, a me nā mea hana hao.

Pono nō hoʻi e mālama ʻia ka mahana hoʻopau liʻiliʻi; ʻo ka ʻae ʻana i ka billet e ʻoluʻolu loa i ka wā o ka deformation hope e hiki ke hoʻonui nui i ka ukana hana pono.

ʻAʻole loa wau e mālama i kēia mau helu ma ke ʻano he ʻano meaʻai honua. Pono e puka mai ka puka makani forging pololei mai ka ʻōlelo hoʻoheheʻe ʻia a hōʻoia ʻia ma ke kaʻina hana maoli.

ʻO ka mea nui, ʻo ke kūlike o ka mahana. Inā aia ka waho o ka billet i ka mahana kūpono a ʻoi aku ka nui o ke anu, ke hana pono nei ka paʻi paʻi i ʻelua mau mea like ʻole i ka manawa like.

Ma ka lima ʻē aʻe, ʻO ka hoʻopaʻa ʻana i ka wela kiʻekiʻe hiki ke hoʻoikaika i ka coarsening palaoa a i ʻole nā ​​hoʻololi metallurgical ʻē aʻe.

ʻO ia ke kumu helu hoʻomehana, soak manawa, ka wela billet, manawa hoʻoili, a make wela pono e hoomalu pu ia na mea a pau.

Pono e ho'olike ka mana pa'i me ka mea a me ka Geometry

2ʻOi aku ka nui o nā mea hao xxx i ʻoi aku ka nui ma mua o ka nui o nā alloys 6xxx maʻamau. Akā mai ka ʻike o ka ʻenekinia forging, ʻAʻole ʻo ka press tonnage wale nō ka pane.

ʻO ke koi maoli e pili ana:

Alloy + Nui Billet + Hoemi + OLELO MAINGETRY + Hoʻolālā Make + Kaʻina Deformation

Hiki i ka mīkini paʻi liʻiliʻi ke hoʻopiha piha ʻole, uila nui loa, nā ana paʻa ʻole, a me ka hoʻouka kiʻekiʻe make.

E hoʻoneʻe wale i ka hana i kahi paʻi nui, Akā naʻe,, ʻaʻole ia e hoʻonā i kahi ʻano mua maikaʻi ʻole a i ʻole kahi ala kahe waiwai ʻole.

No ka paʻakikī 2xxx forgings, Nānā mau au i ka ka hāʻawi ʻana i nā mea ma mua o ka ʻimi ʻana i ka ikaika hou aʻe.

Hiki i kahi preform i hoʻolālā maikaʻi ke hoʻemi i ka deformation kūloko kūpono ʻole a hoʻohana maikaʻi loa i ka hiki ke paʻi.

Loaʻa paha nā ʻāpana paʻakikī mai ka hoʻokumu ʻana i nā pae he nui

No nā geometries maʻalahi, lawa paha ke kaʻina hana wela maʻamau. No nā ʻāpana paʻakikī, a pre-forging me ka hoʻopau-forging ʻoi aku ka paʻa o ke ala.

ʻO ka hana mua e puʻunaue i ka mea a hoʻokumu i ke ʻano maʻamau. A laila hoʻopau ka hana hoʻopau i ka geometry koʻikoʻi.

No nā ʻāpana i koho ʻia, he hana hana wela i ukali ia e ka nui anu a i ʻole ka hoʻopau anu hiki nō hoʻi ke hoʻomaikaʻi i ka pololei dimensional a me ke kūlana ʻili.

Akā ʻaʻole kēia ʻo ia ke ala maikaʻi loa no kēlā me kēia ʻāpana. ʻO ke kaʻina hana hope e pili ana i ka alloy, Goody, koi ʻia ka hoʻomanawanui, Ka Hoʻohuiʻana, a me nā lako i loaʻa.

Hoʻohana mau ke kānāwai o ka papahele hale kūʻai kahiko:

Mai noi i ka make hope e hana i nā deformation a pau. Hāʻawi i ka mea i kahi kūpono e kahe mua.

ʻAʻole hiki ke mālama ʻia ka maikaʻi o nā mea

2He mea maʻalahi nā mea hao xxx i ke kemika a me ke kūlana metala, no laila he mea koʻikoʻi ka hoʻomaka ʻana i ka maikaʻi o nā mea.

Hiki i nā pae haumia keu a i ʻole ka mālama ʻole ʻia ke hoʻopili i ka forgeability, ikaika, Pūnaewele kūleʻa, a me ka paa.

ʻAʻole wau e ʻōlelo pono e hana ʻia kēlā me kēia ʻāpana forging-grade 2xxx wale nō mai ka "aluminika kumu".

ʻO ka mea nui i koi ʻia ʻo ia ka hoʻokō piha ʻana o ka billet a i ʻole nā ​​​​mea i hana ʻia me ka alloy i kuhikuhi ʻia a me ka maʻamau kūpono., me ka kemika hoʻomalu a me ka traceability.

Pono ka mea hoʻolako maikaʻi e hāʻawi i ka ʻike waiwai a me nā moʻolelo hoʻohui kemika ma mua o ka haʻi wale ʻana i ka inoa alloy ma ke kauoha kūʻai..

Pehea e hoʻomalu ai ʻo DEZE Technology i ka 2xxx Forging

A Xuchang KEIA Technology, 2xxx-series mea e like me 2A12 a 2014 hoʻohana ʻia no nā papahana forging precision kūpono.

Hoʻohana ʻo DEZE i nā mea hana forging ma ka 300– 2,500 tona laulā, pu me ka hiki anu-forging, e ʻae ana i ke kaʻina hana e koho ʻia e like me ka ʻāpana geometry a me nā koi hoʻomanawanui.

Hiki ke komo i ke ala hana Ua kalaʻia ka wela, ka hoʻohāinu ʻana/ka hoʻohuʻi ʻana, a i ʻole ka hana wela a me ke anu kahi kūpono ʻenehana.

Hiki ke hōʻoia ʻia ka haku mele ʻana me ka nānā ʻana spectrometric, me nā ukana pili i hoʻolako ʻia me palapala mea a me ka paakiki no ka traceability hana.

5. ʻO nā noi maʻamau o 2xxx Nā ʻāpana hoʻopunipuni

Ke nānā au i kahi alumini 2xxx forging, ʻAʻole wau e hoʻomaka ma ka nīnau ʻana, "Ma hea e hiki ai ke hoʻohana ʻia kēia huila?" Hoʻomaka wau me ka ukana, keka ao, pōʻino pōʻino, a me nā koi mīkini.

He maʻalahi ke kumu: 2Ua koho nui ʻia nā ʻāpana xxx no ko lākou kiʻekiʻe ikaika-a-kaumaha ratio a me ka hana wela.

Kahi o ia mau waiwai, hiki ke hoʻohana maikaʻi ʻia ka hana ʻana i ka hao.

ʻO nā noi ma lalo nei kekahi o nā mea maʻamau no nā ʻāpana hoʻopunipuni 2xxx.

Nā ʻĀpana Kūlana Aerospace

2Ua noʻonoʻo nui ʻia nā ʻāpana hoʻoheheʻe ʻia ʻo xxx no ka aerospace a me nā palapala hoʻolālā mokulele kahi mea nui ka ikaika-a-kaumaha ratio a me ka hana wela-treatable..

Aia nā laʻana maʻamau:

• ʻO nā pale mokulele a me nā mea pono
• Nā lugs hale a me nā clevises
• Nā ʻāpana kau ʻana
• Nā mea hoʻohui
• Nā ʻāpana kākoʻo ikaika kiʻekiʻe

ʻO nā ʻāpana kaʻa a me nā ʻāpana kaʻa kaʻa kiʻekiʻe

2Hiki ke noʻonoʻo ʻia nā hoʻoheheʻe xxx no ke koho ʻia aitompetitive, heihei, a me na mea e pili ana i ka hana kahi i ʻoi aku ka nui o ke kaumaha a me ka ikaika o ke kūkulu ʻana ma mua o ke kūpaʻa corrosion kiʻekiʻe.

Aia nā laʻana maʻamau:

• Nā pale ikaika kiʻekiʻe
• Nā mea pili i ka hoʻomaha
• Kākoʻo kau ʻana
• Nā mea hoʻokele a me nā chassis
• Nā mea hoʻohui hale kūikawā

Enekinia a me na mea wela kiekie

Hiki ke hoʻohana ʻia nā ʻāpana 2xxx i koho ʻia no nā mea pili i ka engine a me nā mea wela haʻahaʻa kahi e pono ai ka paʻa ikaika a me ke kaumaha haʻahaʻa.

Aia nā laʻana maʻamau:

• Nā ʻāpana kākoʻo ʻenekini
• Nā pale wela kiʻekiʻe
• ʻO nā mea hoʻonohonoho hoʻonohonoho wela
• Nā mea mīkini kūikawā
• Lako kākoʻo māmā

ʻO nā mea hoʻolālā mīkini pololei

2Ua kūpono nā hoʻoheheʻe xxx i nā mea e pono ai ʻO ka mīkini CNC nui ma hope o ka hana ʻana.

Hāʻawi ka forging i ke ʻano hoʻolālā kokoke-net, ʻoiai e hana ana ka mīkini i nā hiʻohiʻona pololei e pono ai no ka hui ʻana a me ka hana.

Aia nā laʻana maʻamau:

• Ke hali nei
• ʻO nā pale kau kau pololei
• ʻO nā mea hana i hana ʻia i ka mīkini
• Nā ʻāpana me nā ʻeke paʻakikī
• Nā ʻāpana me nā lua pololei a me nā puka wili

Nā Rivets a me nā mea hoʻopaʻa hale

Hoʻopili nui ʻia kekahi mau ʻāpana 2xxx me nā rivets ikaika kiʻekiʻe a me nā mea hoʻopaʻa, kahi mea nui ke kaumaha haʻahaʻa a me ka ikaika mechanical.

Aia nā laʻana maʻamau:

• ʻAerospace rivets
• Nā mea hana paʻa
• Nā pine ikaika kiʻekiʻe
• Lako pili
• Nā mea hoʻopili kūikawā

Nā Jigs, Nā Mea Mola, a me na mea paahana

Ka hui pūʻana o ka ikaika kiʻekiʻe a me ka machinability maikaʻi hana i nā ʻāpana 2xxx i koho ʻia i kūpono no kekahi mau mea hana ʻenekinia a me nā noi paʻa.

Aia nā laʻana maʻamau:

• Nā mea hana mīkini
• ʻO nā jigs pololei
• Nā papa hana
• Nā mea hoʻonoho
• Nā mea kākoʻo māmā

6. 2xxx Hoʻopalekana vs. 6xxx a me 7xxx: Pehea e koho ai?

7. ʻElima Rula aʻu e hāʻawi aku ai i kēlā me kēia ʻEnekini Forging Young

Ma hope o nā makahiki he nui e pili ana i ka alumini forging press, Ua aʻo au ʻo ka hapa nui o nā pilikia hoʻopunipuni 2xxx ʻaʻole i loaʻa mai kahi hewa nui.

Hele mai lākou mai ka nānā ʻole ʻana i kahi lula kumu. ʻO kēia nā lula ʻelima aʻu e hoʻomau nei i nā ʻenekini forging ʻōpio.

E mahalo i ke Kaiapuni Corrosion

2xxx koho nui ia no ka ikaika, ʻaʻole no ka pale ʻana i ka corrosion kiʻekiʻe.

I ka wā lōʻihi waho, kailoa, a i ʻole nā ​​kaiapuni paʻakai, pono ka mea waiwai i ka hoʻolālā palekana kūpono.

Anodichiz, Kāleka, kukupupuole, a i ʻole nā ​​ʻōnaehana pale ʻē aʻe e koi ʻia ma muli o ka alloy a me ka noi.

Ke hui ʻia ka ʻāpana i hoʻopaʻa ʻia me ke kila, kila kohu ʻole, liulaala, a i ʻole nā ​​metala like ʻole, ʻinoʻino galvanic pono no hoi e noonoo.

Mai kali no ka lilo ʻana o ka corrosion i pilikia kahua. E nānā i ke kaiapuni i ke koho ʻana i ka mea hao.

Inā he koi nui ka welding, E noʻonoʻo hou i ka Alloy

ʻOi aku ka paʻakikī o ka hui pū ʻana ma mua o nā huila 5xxx a me 6xxx maʻamau.

Hiki i ka welding ke hoʻokomo i ka māhā, hoʻopalupalu wahi-wela, a me ka lilo ʻana o nā waiwai i mālama ʻia me ka wela.

No kahi hale e hilinaʻi nui ana i ka wiliwili, E noiʻi mua au i ka ʻohana huila hiki ke weldable.

Ma kahi o 2xxx pono e hoʻohana, Hoʻolālā ka mechamical, hoʻopaʻa ʻana, a i ʻole ka riveting kūpono paha ma muli o ka hoʻolālā.

He maʻalahi ka haʻawina: koho i ka huila no ke kaʻina hana holoʻokoʻa, ʻaʻole wale no kona ikaika tensile.

Mai Manaʻo i ke Kūlana Forged e like me ke kūlana Mechanical Hope

No nā huila 2xxx hiki ke mālama i ka wela, hoʻokumu ka forging i ke ʻano a me ke ʻano deformation, akā, loaʻa mau nā waiwai mechanical i makemake ʻia ma o kahi kikoʻī hoʻoponopono-lāʻau a me ke kūlana ʻelemakule.

ʻO T4 a me T6 nā laʻana maʻamau, aka, o ka wela kupono e pili ana i ka hao, hua huahana, a noi aku.

Hāʻawi maʻamau ʻo T4 i kahi hui pono o ka ikaika a me ka ductility, ʻoiai ʻoi aku ka ikaika o nā kūlana ʻelemakule hiki ke hāʻawi i ka ikaika ʻoi aku.

No ka mea lawe ukana, pono e wehewehe pono ke kaha ki'i i ka huila a me ka huhu.

Mai noʻonoʻo e hiki ke hoʻohana pololei ʻia kahi ʻāpana i hoʻopaʻa ʻia ma muli wale nō o ke kani ʻana o ka forging ponoʻī.

E hoʻomalu i ka mea hoʻomaka

Ke haʻi mau nei au i nā ʻenekini ʻōpio: mai ho'āʻo e hoʻoponopono i ka maikaʻi billet maikaʻi ʻole me ka make maikaʻi.

Pono ke kumu kūʻai hoʻomaka e hoʻokō i ke kemika alloy i kuhikuhi ʻia a me ke kūlana waiwai kūpono.

He mea koʻikoʻi ka hōʻoia ʻana a me ka huli ʻana i ke kemika no 2xxx alloys no ka mea e pili ana ka hana ʻana i ka ikaika, Pūnaewele kūleʻa, ʻO ka mālama wela, a me ka pane forging.

Ma mua o ka hilinaʻi ʻana i ka huaʻōlelo "primary aluminum" wale nō, hōʻoia i ka mea kiko'ī, ʻO ka loiloi Chemical, hōʻike pūʻulu, a me ka palapala hiki ke huli.

Hoʻomaka ke kaʻina hana paʻa me ka mea paʻa.

E koho i kahi mea hoʻolako forging no ka hiki ke kaʻina hana, ʻAʻole kaomi wale i ka Tonnage a i ʻole ke Kumukūʻai

2ʻAʻole hiki ke kala ʻole ʻia nā huila xxx. ʻOi aku ka pale deformation kiʻekiʻe, ʻike wela, a ʻoi aku ka paʻa o nā koi hoʻomalu kaʻina hana, ʻo ia hoʻi, hiki i kahi hale kūʻai forging inexperienced hiki ke holo koke i ka haki ʻana, hoʻopiha piha, pelu ana, uila nui loa, a i ʻole ke ʻano kūʻokoʻa.

I ka loiloi ʻana i kahi mea hoʻolako, E nānā au ma waho o ke kumukūʻai i ʻōlelo ʻia a nīnau:

Hiki iā lākou ke hoʻolālā i ka preform? Hiki iā lākou ke hoʻomalu i ka wela billet? Maopopo iā lākou 2xxx die filling?

Hiki iā lākou ke hoʻomaʻamaʻa a nānā pono i ka forging? Hiki iā lākou ke mīkini i ka mea i hoʻopau ʻia?

He mea nui ka mana paʻi, akā, ʻaʻole hiki i ka mīkini paʻi 2,000-tonne ke hana maʻalahi i ka hana 2xxx maikaʻi.

ʻO ka mana maoli i ka hui pū ʻana o ka mana mea, make ʻenekinia, ʻike hoʻopalekana, ʻO ka mālama wela, Cnc iching, A ke nānāʻana.

FAQ

Hiki ke hana ʻia ka alumini 2xxx?

ʻAe. 2Hana ʻia ʻo xxx i loko o kahi puka aniani wela, ʻO ka maʻamau ma kahi o 430–460°C ka wela forging mua, me ka wela forging hope ʻaʻole ma lalo o 350–380°C.

Pono e lawa ka tonage lako ma muli o ke kū'ē o ka deformation kiʻekiʻe.

He aha ka ʻokoʻa ma waena o 2A12 a me 2024?

He mau hoa pili lakou. 2024 ʻo ia ka inoa honua; 2A12 (mamua LY12) ʻo ia ka papa Kina i hoʻohana nui ʻia i ka ʻoihana home.

Ua like nā waiwai, akā, ʻokoʻa ka ʻae ʻana i ke kemika a me nā palapala hōʻoia mea hoʻolako—e hōʻoia mau i ka maʻamau kūpono.

He aha nā hemahema kalahala i maʻamau ma 2xxx?

ʻO ka haki ʻana a me ka hoʻopiha piha ʻole ka pilikia nui, ma muli o ka puka aniani wela haiki a me ke kūpale deformation kiʻekiʻe.

Hiki i ka wela nui ke kumu i ke ahi; ʻo ka underheating ke kumu o ka pohā. Hiki ke pelu a me nā ʻūhā ke lawa ʻole ka hoʻolālā ʻana a i ʻole ke kaomi ʻana i nā tonage.

He aha ka huhū e hoʻohana ʻia ma hope o ka hoʻopaʻa ʻana iā 2xxx?

T4 (hopena + ʻelemakule maoli) no ka ductility a me ka machinability, a i ʻole T6 (hopena + ʻelemakule hana) no ka ikaika kiʻekiʻe.

Aia ke koho i ke ala hoʻouka, koi luhi, a me ka mikini iho.

Hiki iā XuChang DEZE ke hana i nā ʻāpana 2xxx series?

ʻAe. Hoʻopili mākou i ka 2A12, 2014, a me nā māka 2xxx ʻē aʻe me ka hoʻohana ʻana i ka ingot alumini mua i hōʻoia ʻia.

Loaʻa i kā mākou mau mea hana 300T–2500T nā mīkini forging precision a me nā mīkini forging anu, kākoʻo wela, anu, a me nā kaʻina hana hybrid.

E hoʻouna mai iā mākou i kāu kaha kiʻi no kahi loiloi DFM manuahi e uhi ana i ka hiki, ala kaʻina hana, a me ke kumu kuai.