He aha keʻokiʻana o Laser?

Ua hoʻololi kaʻenehanaʻo Laser Coving i ka hana hana ma ka hāʻawiʻana i ka pololei a me ka heluʻana i keʻanoʻokiʻoki.

Ke hoʻomaka nei i ka hopena o 1960, ʻO kaʻokiʻana o Laser i loaʻa i nā holomua nui, e neʻe ana i nā'ōnaehana kumu i loko o ka mea paʻakikī loa, Nā mīkini uila i kālaiʻia.

I kēia mau lā, e pāʻani ana i kahi hana koʻikoʻi ma nāʻoihana likeʻole, e komo pū me ka Aerospace, aitompetitive, a me na uila, E hoʻokō i ka hana o nā mea paʻakikī o nā mea paʻakikī me ka pololei kūʻokoʻa a me ka pono.

Hoʻopiliʻia kēia blog post i loko o nā invussies o kaʻokiʻana o ka laser, Keʻimi nei i kāna kaʻina hana, nāʻano, Loaʻa, noi, a me nā kumukūʻai.

1. He aha kaʻokiʻana o Laser?

Ma kānaʻano, Hoʻokomoʻiaʻo Laser i kahi e kuhikuhi ana i kahi pahu kiʻekiʻe kiʻekiʻe i hoʻopaʻaʻia ma luna o kahi papa o kahi mea i lalo, 'Ehōʻike, a iʻole iʻole, hana i kahiʻoki.

Ua uluʻia ka pahuʻo Laser e kahi kumu Laser, ka mea e hana ai i kahi beam kukui i hoʻopiliʻia e hiki ke nānāʻia i kahi wahi liʻiliʻi.

Hiki i kēia ikehu i ka ikaika i hoʻopaʻaʻia no ka nānāʻana a me nāʻokiʻoki e paʻakikī i ka paʻakikī e hoʻokō me nā hanaʻokiʻoki.

2. Pehea e hana ai nā hanaʻokiʻoki o Laser

ʻO kaʻokiʻokiʻanaʻo Laser i kahi ala kūpono a kūpono hoʻi o nāʻokiʻoki e hoʻohana ana i kahi beam kiʻekiʻe.

Hoʻokomoʻia ke kaʻina hana i nāʻano he nui a me nā'āpana e hana pū ana e hoʻokō i ka pololei a me nāʻoki maʻemaʻe. Eia kahi kiko'ī kiko'ī o keʻano o ka hanaʻokiʻana o Laser:

Laser hanauna

• ʻO ka hoihoiʻana i keʻano o keʻano: ʻO ka hana mua ma ka hanaʻokiʻokiʻo Laser eʻoki ana i ka hanauna o keʻano o ka'āinaʻo Laser.
  Loaʻaʻia kēia ma o ka hoihoiʻana i kahi haʻahaʻa, hiki ke lilo i kahi hau (E like me CO2), A paʻa (e like me nd: Hua), a iʻole he fiber (E like me nā meaʻelua).

• • Nā Hana Pili: Kahi hui o nā hau (ʻO CO2, nitrogen, a helium) he mea uila e hoʻopiliʻia e hana i kahi beam laser.
  • Nā Lasares: ʻO kahi kumuʻo Diode PUMP e hoʻoiho i kahi che fert-dound-Dound-Dound Felas Ottic Cable e hoʻopuka i ka beam o Laser.
  • ND: Yag mau mea: ʻO kahi kukui uila a iʻole diode pamp e hoʻoiho i kahi mytrium.

Beam un

• Nā'āpana optical: Ua kuhikuhiʻiaʻo iaʻo Laser Paser Beam a me ka hoʻopiliʻana i ka hoʻohanaʻana i kahiʻano o nā aniani a me nā lenses.
• E pili ana i nā lens: ʻO nā lens hope loa e pili ana i ka paser ma kahi liʻiliʻi i kahi wahi liʻiliʻi ma ka waihona, ma waena 0.001 a 0.005 iniha i loko o ka lime.
  ʻO kēiaʻano hoʻohālikelike o nā hopena o ka ikehu i kahi mana kiʻekiʻe loa.
• ʻO ka'ōnaehana hoʻokele Beam: Hāʻawiʻiaʻo BOCUSED BEAM i ka waihona ma ke poʻoʻoki, hiki ke neʻe i nā koi he nui e hahai i ke alaʻokiʻoki i makemakeʻia.

ʻO ka pilina pili

• Huamana mehuna: Ua hanaʻo ia i ka mea hanaʻo Coise Coam i ka wela wela ma keʻano o ka hoʻopiliʻana me ka waihona.
  Hiki i keʻano ke kau mau tausani kaukani o ke kiʻekiʻe, e kumu ana i ka mea e hoʻoheheʻe ai, 'Ehōʻike, a iʻole iʻole.
• Keʻokiʻana i ka mīkini:

• • Hoʻomālamalama: No nā mea me nā hana kiʻekiʻe thermal (E like me nā metals), ʻO ka wela ke kumu e hoʻoheheʻe ai i nā mea.
  • 'Ekākā: No nā mea hoʻohui (E like me ka lāʻau a iʻole pepa), ʻO ka wela ke kumu e puhi ai i ka mea e puhi ai.
  • Kūwan: No nā mea me kahi wahi haʻahaʻa haʻahaʻa (e like me nā plastics), ʻO ka wela ka mea e hōʻeha ai i ka mea e hoʻopili ai.

Kōkua i nā mea kanu

• ʻO Role o ke kōkuaʻana i nā games: E kōkua pinepineʻia nā mea kūʻai aku e hoʻonui i ke kaʻinaʻoki a hoʻomaikaʻi i ka maikaʻi cut.

• • Oxycongen: No kaʻokiʻana i nā metals, Hoʻohanaʻia ka oxygen e kākoʻo i ka hopena exothermic, e kōkua i kaʻokiʻana ma o nā mea hou aʻe.
  • Nitrogen: No kaʻokiʻana i nā metals, Hoʻohanaʻiaʻo Nitrogen e pale i ka paleʻokiʻia mai ka oxidation, ka hopena i kahi mea hoʻomaʻemaʻe a me kaʻokiʻoki.
  • Kōlea: No kaʻokiʻana i nā men-metala, Hiki ke hoʻohanaʻia ka ea e puhi i nā mea moluna a iʻole nā ​​mea i puhiʻia, Ke hōʻoia nei i kahiʻoki maʻemaʻe.

ʻO kaʻokiʻana i ke ala

• Palapala honua: Ke kāohiʻia nei ke alaʻokiʻoki e kahi hoʻolālā kamepiula (Cad) a me nā hana hoʻolālā kamepiula (CAMH) 'ōnaehana'ōnaehana.
  Hoʻolālā ka polokalamu CAD i keʻano eʻokiʻia, a ua unuhi ka polokalamu iā Cam.
• 'Ōnaehana'ōnaehana: Ua kauʻia ke poʻoʻokiʻoki i kahi'ōnaehana e hiki ke neʻe i nā koi he nui (X, Y, a i kekahi manawa z).
  Hāʻawi kēia i ka laser e hahai i ke ala pololei i weheweheʻia e ka polokalamu cam / cam.

Mālama a me ka palekana

• 'Ōnaehana anuina: No ka paleʻana i ka hanaʻana a hōʻoia i ka hana maʻamau, Ua hoʻolakoʻia ka mīkiniʻokiʻokiʻo Laser me kahi'ōnaehana hōʻoluʻolu.
  Hiki i kēia ke lilo i ka wai-moe a iʻole ka hau, Ma muli o keʻano a me ka nui o ka laser.
• ʻO nā ana palekana: Hoʻokomoʻia kaʻokiʻana i nā kukuiʻulaʻula a me nā mea maikaʻiʻole. Hoʻokomoʻia ka palekana palekana:

• • ʻO ka wahi hana i hoʻopaʻaʻia: ʻO ka'āpanaʻokiʻia e hoʻopuniʻia e pale i ka radiation Laser mai pakele.
  • Pale maka maka: Pono nā mea hana e hoʻohana i nā maka palekana pono e pale aku i ko lākou mau maka mai ka paser ka laser.
  • 'Ōnaehana hāmeni: Hoʻohanaʻia kahi'ōnaehana maʻamau e wehe i nā fumes a me nā kiko'ī i hanaʻia i ka wā o ke kaʻinaʻoki.

3. ʻO nā hiʻohiʻona nui o nā meaʻokiʻoki o Laser

Hāʻawi i nāʻenehana hanaʻo Laser-ʻokiʻoki i nā koho likeʻole, ʻO kēlā me kēia mea hana i nā mea kiko'ī a me nā noi. ʻO nāʻano nui o nā meaʻokiʻoki o Laser:

CO2 Laser Covers

Hoʻokomoʻia nā CO2 Lasers ma ka hoʻowalewaleʻana i kahi papa kiʻekiʻeʻo Laser ma kahi o nā aniani a me nā lenses, e pili ana i kahi pololei.
ʻO ka pahuʻo Laser e hoʻopili me ka papa o ka mea, heating it to the point of vaporization or melting, I laila e hana ana i kaʻoki i makemakeʻia.

Nāʻano hiʻohiʻona:

• Hauhā: 10.6 Micrometers
• Mana Hōʻailona: Maʻamau maʻamau mai 200 i 10,000 nānā
• Kūpono kūpono: Maikaʻi loa no kaʻokiʻana i nā mea hana non-Metallic a me nā metala
• ʻOiaʻiʻo: Pono haʻahaʻa (a puni 10%)

Noi:

• Nā mea non-metallic: Wood, Acrylio, kāleka, Pepana, Fabric, a hehi
• Nā Kūlana Pololei: ʻAihue kīwī, kila kohu ʻole, a aluminlum a i 10-20 mm mānoanoa

Loaʻa:

• Pumona nui: Hiki ke hoʻokō i nāʻokiʻoki maikaʻi loa a me nā hana kiko'ī
• Kūmole: He kūpono no ka nui o nā kumuwaiwai
• Kumukūʻai-maikaʻi: ʻO nā kumukūʻai haʻahaʻa haʻahaʻa i hoʻohālikelikeʻia i nāʻano'ē aʻe

Loaʻa nā hemahema:

• Palenaʻia i nā metals: ʻAʻole kūpono no kaʻokiʻana i nā metala shicker
• Mālama: Koi pono i ka mālama maʻamau o keʻano o ke kino a me nā'āpana optical

ʻO nā meaʻokiʻokiʻo Fiber Laser

Ua hoʻohanaʻo Fiber Laser Code e hoʻohana i kahi laser kiʻekiʻe i hanaʻia ma o nā optics fiber, e pili ana i kahi beam i hoʻopiliʻia ma luna o ka papa o nā mea.
ʻO kēiaʻano hana ma ka pauʻana o ka cude pololei o kaʻili i nā mea hoʻonaninani-kiʻekiʻe e like me nā kila kila, aluminum, a he leahee.

Nāʻano hiʻohiʻona:

• Hauhā: 1.064 Micrometers
• Mana Hōʻailona: Nā wahi mai 20 i 15,000 nānā
• Kūpono kūpono: Maikaʻi no kaʻokiʻana i nā metals, nā mea noʻonoʻo
• ʻOiaʻiʻo: Hikina Nui Kūlana Nui Mea Pono (a i 30%)

Noi:

• Melas: Kila kohu ʻole, ʻaihue kīwī, aluminum, a me nā metala likeʻole
• Kohano: Hiki ke hōʻoki i nā metals i 30 mm mānoanoa

Loaʻa:

• Maffienv nui: ʻO ka hoʻohaʻahaʻa haʻahaʻa haʻahaʻa a me ka wikiwiki kiʻekiʻe
• Ka mālama haʻahaʻa: ʻOi aku ka liʻiliʻi o nā'āpana a me ka mālama pinepineʻana
• ʻO ka hoʻohālikelikeʻana: Hiki ke hōʻoki i nā metala noʻonoʻo nui me ka hōʻinoʻole i ka laser

Loaʻa nā hemahema:

• ʻO ke kumukūʻai kiʻekiʻe kiʻekiʻe: ʻOi aku ka nui ma mua o nā meaʻokiʻoki co2 Laser
• Palena i nā metala: ʻAʻole kūpono no nā lako hanaʻoleʻole

ND:Hua (Neodymium-dotrium altrium alumnum garnet) Laserʻokiʻoki

(Neodymium-dotrium altrium alumnum garnet) Ua hoʻohanaʻo Laser Code i kahi koʻokoʻo crystal e like me keʻano o keʻano, ka hanaʻana i kahi onina ikaika loa.
Hoʻohana pinepineʻia kēiaʻano no nā mea hoʻohālike a me nā noi e koi ai i ka hoʻopiʻiʻana.

Nāʻano hiʻohiʻona:

• Hauhā: 1.064 Micrometers
• Mana Hōʻailona: Nā wahi mai 100 i 4,000 nānā
• Kūpono kūpono: Kūpono no nāʻano waiwai, komo me nā metals, Nā Kūlana, a me nā plastics
• ʻOiaʻiʻo: Hiki i ka hana malticical electrical (a puni 3%)

Noi:

• Melas: Kila kohu ʻole, ʻaihue kīwī, a me nā metala'ē aʻe
• Nā cemics a me nā plastics: ʻO kaʻokiʻana a me ke kāwiliʻana
• Kohano: Hiki ke hōʻoki i nā mea nui i 50 mm

Loaʻa:

• Pumona nui: Maikaʻi loa no ka hanaʻana a me nā hana kiko'ī
• Kūmole: He kūpono no ka nui o nā kumuwaiwai
• ʻO ka hana pulsed: Hiki ke hana ma nā papaʻelua a me nā mode, e hana ana iā ia no nā noi likeʻole

Loaʻa nā hemahema:

• ʻO ke kumukūʻai kiʻekiʻe kiʻekiʻe: ʻOi aku ka nui ma mua o nā meaʻokiʻoki co2 Laser
• Mālama: Koi pono i ka mālama maʻamau o ke kukui a me nā'āpana optical
• Nui a me ka paʻakikī: ʻOi aku ka nui aʻoi aku ka nui o nā'ōnaehana paʻakikī e hoʻohālikelikeʻia i nā fibers a me nā cod

Ka hoʻohālikelikeʻana i nāʻano laser

	Kālā laser	Nā Lasal Galstal (ND: Yag a iʻole nd: Yvo)	Pōhaku Cumer
Moku'āina	Na keiau e pili ana	Kūlana paʻa	Kūlana paʻa
ʻAnoʻano	Wood, Acrylio, aniani, Pepana, Nā Kūlana, Nā Plasttics, ʻO nā kiʻi a me nā kiʻiʻoniʻoni, 'ōpū, Kāhele	Melas, Nā Metals Coted, Nā Plasttics, Nā Kūlana	Melas, Nā Metals Coted, Nā Plasttics
Pump kumu	ʻO ka hoʻokuʻuʻana	Lami, Diode laser	Diode laser
Hauhā (}m)	10.6	1.06	1.07
ʻOiaʻiʻo (%)	10	2 - Lumia, 6 - diode	<30
Spot coumeter (mm)	0.15	0.3	0.15
Mw / cm2 mana ikaika	84.9	8.5	113.2

4. He aha nā hoʻonohonoho nui a me nā'āpana o kaʻokiʻoki o Laser?

Ua hilinaʻiʻo Laser i nā koina i nā'āpana kiko'ī a me nā hoʻonohonoho e mālama ai i ka ikaika o ka laser, pānaʻi, wikiwiki, a me nā kumu koʻikoʻi koʻikoʻi no ka hoʻokōʻana i nā hopena kūpono.
ʻO kēlā me kēlā me kēia pākēneka nui e hoʻopiʻi ana i ka maikaʻi a me ka pono ma nā kumu likeʻole.

Laster Power

Hōʻike ka mana Laser i ka uluʻana o ka uluʻana o ka bean o ka laser no kaʻokiʻana, a he wahi hana pilikino e pili pololei ana i kaʻokiʻana i ka hiki ke hōʻoki a me ka wikiwiki.
E ana pinepine i nā watts (W), ʻO nā mana Laser e hele mai 1,000 i 10,000 nānā (1-10 kw), Ke hilinaʻi nei i nā mea a me ka mānoanoa e hoʻoiliʻia.

Laser Boam mode (Kuhi hewa)

ʻO keʻanoʻo Laser Beam, ʻikeʻia e like me keʻano o keʻano o ka electromagnetic electromagnetic (Kuhi hewa), E wehewehe i keʻano a me keʻano o ka pohōʻo Laser Boam.

ʻO keʻano tem00, hōʻikeʻia e ka moʻolelo Baussian Boam, ua hoʻohana pinepineʻia no nā noi koho koho.

Nā mānoanoa

ʻO nā mea i pili pono i nā mea e pili ana i ka hana o ka mea iʻokiʻia, ʻO ka hoʻohālikelike nuiʻana i keʻano o ka noi a me keʻano o keʻano.

Hiki i kaʻokiʻana keʻoki i nā mea i loaʻa i nā'āpana mai nā'āpana pale (0.1 mm) i nā papa kuhikuhi (a i 25 mm), e hana ana ia no nāʻoihana hana e like me ka automotive, AerERPPACE, a me na uila.

ʻOki wikiwiki

Ke hoʻololi nei ka wikiwiki o ka wikiwiki i ka wikiwiki o ka laser ma waena o ka papa o keʻano i ka wāʻokiʻoki.

Ana i loko o nā mika ma kēlā me kēia minuke (m / my), ʻO ka maʻamau maʻamau mai 1 m / min to 20 m / my.

ʻO ka nānāʻana i ka wikiwikiʻoki i kahi kaulike ma waena o ka pono a me ka maikaʻi, e hōʻoia i nāʻokiʻoki pololei me ka hōʻoleʻole i ka pono kūpono.

Kōkua kōkua

Kōkua kōkuaʻo Gars Garcial i ka coucial i keʻokiʻana i ka laser e like me ka puhiʻana i nā mea molten, e hōʻoia ana i nā kihi maʻemaʻe.

ʻO ke kaomi o keʻano kōkua, a i ole oxygen a nitrogen, i mālamaʻia ma waena 5 bar a 20 Bar, Ke hilinaʻi nei i nā mea a me nā koi koi.

Kūlana Kūlana

Hōʻike ka kūlana i ke kūlana ma waena o ka mamao ma waena o ka laser lens a me nā meaʻona, Ke koho nei i kahi e loaʻa ai ka beam o ka laser i ka nui o ka ikaika loa no kaʻokiʻana.

Hoʻoponopono i ke kūlana kūpono (ma waena 0.5 MM O 5 mm) he mea nui no ka mālamaʻana i kaʻokiʻokiʻana ma waena o nā mānoanoaʻokoʻa.

Pupululu

ʻO nā mea nui pulse i ka manawa pinepine o ka puser i nā puses i ka wāʻokiʻoki, ʻO ka hoʻololiʻana mai nā pulu hoʻokahi i nā manawa pinepine i ka kilorrtz (khz) Nā haʻona.

Ke hoʻohālikelikeʻana i nā pulu pluse pinepine i kaʻokiʻana a me ka hoʻoiliʻana i ka wela, e alakaʻi ana i ka maikaʻi i makemakeʻia a me ka pauʻana o kaʻaoʻao.

ʻO ka nui o ka beam

ʻO ka inoaʻo Beam, a iʻole ka nui, e pili ana i ka nui o ka beem o ka laser ma kāna wahi kūpono, mālama maʻamau ma waena 0.1 MM O 0.5 mm no kaʻoki kiʻekiʻe.

Ke hōʻoia neiʻo Chorling Boimeter Biometer i ka hoʻokaʻawaleʻana i nā mea e hoʻokaʻawale ai a ho'ēmi i nā wahi wela wela, ʻo ia ka mea nui no ka hoʻopiliʻana i nā hanaʻokiʻoki.

Keʻokiʻana i keʻano

Keʻano o kaʻokiʻoki i hoʻohanaʻia e like me ka oxygen, nitrogen, a iʻole he hopena i hanaʻoleʻia i nā kaʻinaʻokiʻoki a me nā hopena.

ʻO nā mea likeʻole e like me nā mea likeʻole me nā lako, ka hoʻoikaikaʻana i ka maikaʻi, wikiwiki, a me ke kihi. ʻO ke kohoʻana i keʻano o ke kīwī kūpono kūpono e pono ai no ka hoʻokōʻana i nā hopena i makemakeʻia.

Nozzle nozzera

ʻO ka inoa inoaʻole nozzle e pili ana i keʻano o ka nozzle o ka nzzle ma o ke kaheʻana o ke ala i ke kaheʻana o ke kino.

Pono ia e hoʻokūkū i ka diameter beamometer no ka hoʻokaʻawaleʻana i nā mea i hoʻokaʻawaleʻia a me nāʻokiʻoki maʻemaʻe.

Maki, ʻO Northile Diameter e hele mai 1 mm i 3 mm, Ke hilinaʻi nei i ka noi a me ka mānoanoa kūlohelohe.

5. Loaʻa i nā meaʻokiʻoki o Laser

Hāʻawi i nā mea hana hana Laser. Eia nā mea nui loa:

Pololei a pololei

Ua hoʻohuliʻiaʻo Laser i kahi kūlana kiʻekiʻe no kona kiʻekiʻe kiʻekiʻe a me ka hiki ke hoʻokō i nā pono paʻa, pinepine i loko o ± 0.1 mm.

ʻO nā mea i loaʻa i ka beam coam e hiki ai i nā hana hoʻohālikelike a me nāʻokiʻoki, Ke kūpono nei i nā noi e noi i nā kiko'ī kūpono.

ʻO kēia pae kūpono o ka hōʻemiʻana i ka pono no nā hana lua, Mālama i ka manawa a me nā uku.

Pono a me ka wikiwiki

ʻO kekahi o nā hiʻohiʻona kū o ka cutting laser eʻoki ana. Hiki i nā mīkini Laser ke hoʻokō mau aʻokiʻoki i nā wikiwiki wikiwiki, ʻO ka hoʻonuiʻana i ka huahana.

ʻo kahi laʻana, Hiki i kahi FUBER Laser ke hōʻoki ma nā metala ma nā wikiwiki 30 mika ma kēlā me kēia minuke, Ke hilinaʻi nei i ka mānoanoa.

Hoʻopau kēia hana i nā manawa hana holoʻokoʻa, Ke kūpono nei i kūpono no ka hana liʻiliʻi a me ka nui.

Loaʻa ka waiwai

ʻO kaʻokiʻokiʻanaʻo Laser i keʻano o ka cutting a hiki ke hōʻoki i kahi nui o nā kumuwaiwai, komo me nā metals (E like me ke kila, aluminum, a me Titanium), Nā Plasttics, Wood, aniani, a me nā puke.

Hāʻawi kēia wikiwiki i nā mea hana e hoʻohana ai i kaʻokiʻana i ka laser no nā noi likeʻole, mai ka prototyping i ka hana hope loa ma nāʻoihana he nui.

Kumukūʻai-kūpono

ʻOiai ka waiwai kālā mua ma Laser e hōʻoki ana i nā mea hana, ʻO nā mālama lōʻihi loa he nui loa.

Ua hōʻemiʻo Laser i nā hōʻemi waiwai ma muli o kāna mau koho koho, hoʻemi i nā kumukūʻai waiwai holoʻokoʻa.

KAHUIA, ʻO ka wikiwiki a me ka maikaʻi o ka cuding laser e alakaʻi ana i nā kumukūʻai e hoʻohaʻahaʻa ai i nā kumukūʻai, e hana ana i kahi hopena kūpono no nā mea hana.

Loaʻa ko kaiaulu

ʻOi aku ka maikaʻi o kaʻokiʻana o Laser i kahiʻano maʻamau i hoʻohālikelikeʻia i nāʻanoʻokiʻoki. E hoʻonui ai i ka liʻiliʻi liʻiliʻi a me nā emissions, Mahalo i kāna mau koho koho.

Pono pinepine ka ʻenehana i nā kumuwaiwai liʻiliʻi no ka hoʻomaʻemaʻe a me nā hana lua, e hoemi hou ana i kona kapuai kaiapuni.

Eia hou, ʻO nā holomua i ka ʻenehana laser ua alakaʻi i nā mīkini ʻoi aku ka ikaika o ka ikehu, Ke hāʻawi nei i nā hoʻomaʻamaʻa hoʻomaʻamaʻaʻana.

Lole liʻiliʻi e komo ai

ʻAʻole like me nā ʻano ʻokiʻoki mechanical, ʻAʻole pili ka ʻoki ʻana i ke kino me ka mea, ʻo ia ka hopena i ka liʻiliʻi o ka ʻaʻahu a me ka waimaka ma nā mea hana.

ʻO kēia nele o ka pilina e ho'ēmi i nā kumukūʻai mālama a hoʻonui i ke ola o nā meaʻoki, e lilo ia i koho hilinaʻi no nā mea hana.

Nā noi noi

He kūpono ka ʻoki ʻoki ʻana i ka laser no ka nui o nā noi ma nā ʻoihana like ʻole, e komo pū me Automotive, AerERPPACE, nā leka uila, a me nā mea hoihoi maʻamau.

ʻO kona hiki ke hana i nā hoʻolālā paʻakikī a me nā ʻoki kikoʻī he mea waiwai ia no ka hana ʻana i nā mea āpau mai nā mea paʻakikī i nā mea hoʻonaninani..

6. Loaʻa i nā hemahema o kaʻokiʻana o Laser

ʻOiai hāʻawi ka ʻoki ʻoki laser i nā pono he nui, hele mai hoʻi me kekahi mau kiʻi paʻi e noʻonoʻo pono ai nā mea hana. Eia nā hemahema nui o kaʻenehanaʻokiʻoki:

Uku kumu

ʻO kekahi o nā mea waiwai nui loa e hāpai i kaʻenehanaʻokiʻokiʻo Laser Cuting i kaʻenehana kiʻekiʻeʻo ia ka mea kūʻai mua e pono ai no nā mea hana.

Hiki ke kūʻaiʻia nā mīkini hana hana maʻamau, ka mea e pale ai i nāʻoihana liʻiliʻi a iʻole nā ​​hoʻomakaʻana mai ka hoʻohanaʻana i kēiaʻenehana.

KAHUIA, ʻO ke kumukūʻai o ka mālamaʻana a me nā hoʻoponopono e hiki ke hoʻohui i ke kālā kālā holoʻokoʻa.

Mālama

Pono nā mīkini hana i nā mīkini hana maʻamau e mālama i ka hana maikaʻi loa a me ka pololei. Hoʻopilikia kēia iā Calibration, Lens hoʻomaʻemaʻe, a me nā manaʻo maʻamau.

Hikiʻole ke mālama pono i nā mea hana e hiki ke alakaʻi i ka hoʻololiʻana i kaʻoki, ʻO nā manawa hana lōʻihi, a hoʻonuiʻia nā kumukūʻai hana.

No nāʻoihana me nā loea loea, Hiki i kēia ke kuhikuhi i kahi paʻakikī.

Nā palena palena

ʻAʻole kūpono nā huahana a pau no kaʻokiʻana o Laser. Nā metals noʻonoʻo, e like me ke keleawe a me ke keleawe, hiki ke kumu i nā pilikia ma ka noʻonoʻoʻana i ka beam o Laser, hiki i ka hōʻinoʻana i nā lako.

KAHUIA, Hiki i kekahi mau mea ke hana i nā mea hōʻeha hōʻeha a iʻole ka lepo i ka wāʻokiʻoki, e koi ana i nā hana kūpono a me nā hana palekana.

Nā hopohopo palekana

ʻO kaʻokiʻana i kaʻokiʻana i nā pilikia palekana, komo me nā hōʻeha o ka maka maka mai nā alaloa o Laser a me ke ahi ahi mai nā kiʻekiʻe kiʻekiʻe mai ke kauʻana i ke kiʻekiʻe.

Pono nā mea hana e pili pono i nā protocols palekana palekana, E hoʻohana i nā mea pale pale, A e hōʻoia i ka hana mīkini kūpono e hoʻokele i kēia mau pilikia.

Ke hoʻokō nei i nā hana palekana e hiki ke hoʻonui i nā hana hana a me nā uku.

ʻO nā wahi wela wela (Haz)

Ua hanaʻia nā kiʻekiʻe kiʻekiʻe i ka wā o kaʻokiʻana i ka laser ke hana i nāʻona wela wela (Haz) a puni nā kihiʻokiʻoki.

Hiki i kēia mau wahi ke loaʻa nā loli i nā waiwai waiwai, e like me ka paʻakikī a iʻole brittleness, hiki ke pili i ka pono o ka huahana i pau.

I nā noi e koi ana i nā hiʻohiʻona kūpono kūpono, Hiki i kēia mea hopohopo koʻikoʻi.

Ka palena palena

ʻOiaiʻo Laser eʻoki ana i nā excel excels i ka hanaʻana i nā mea e like me nā mea maʻalahi, E hakakā paha me nā mea nui loa.

Hiki i ka wikiwiki ka wikiwiki e emi mai ka nui o nā mānoanoa, e alakaʻi ana i nā manawa hana lōʻihi a me nā pilikia e hiki ai i ka hoʻokōʻana i nāʻokiʻoki maʻemaʻe.

No nā mea hōʻikeʻike, nāʻanoʻokiʻoki'ē aʻe, e like me kaʻokiʻana o Plasma, Eʻoi aku paha.

Ke hilinaʻi nei i ka mākaukau o ka mea hana

ʻO ka maikaʻi a me ka maikaʻi o kaʻokiʻana i kaʻokiʻana i ke kaomiʻana i ka pae kiʻekiʻe o ka luna.

Hoʻonohonoho kūpono, koho koho, a me ka cali uila e koi i kahi loea i hoʻomaʻamaʻaʻia aʻikeʻia.

Hiki i ka hemahema o ka loea e hiki ke hopena i nāʻokiʻoki maikaʻi, hoonui i ka pau, Aʻo nā hana hoʻomohala.

7. Nā noi o kaʻokiʻana

Ua hoʻohanaʻiaʻo Laser Cotting i kahi o nāʻoihana o kaʻoihana:

Nā noiʻenehana

• Ka Hoʻolālā Wīwī: ʻO kaʻokiʻana i nā'āpana e like me nā brackets a me nā'āpana chassis.
• Na'Āpana Nossopace: Mea hana koʻikoʻi koʻikoʻi i nā mea kūpono e pono ai.
• Nā leka uila: ʻOkiʻoki i nā papa cicuit a me nā'āpana me nā'āpana liʻiliʻi.

Nā huahana kūʻai

• Mea waiwai a me nā lako: Ke hana nei i nā hoʻolālā hoʻokūkū e koi ai i nā kiko'ī kūpono.
• Hale hale hale a me nā mea pono: Nā'āpana maʻamau i hoʻopaʻaʻia i nā makemake pilikino.

Nā noi maʻi aʻoaʻo

• Nā mea kani: ʻO kaʻokiʻana i nā mea hana no nā mea hana a me nā mea hana i hoʻohanaʻia ma nā kaʻina hana.
• Nā mea kanu a me nā prosthetics: Nā mea hana kūpono e kūpono ai i nā pono kūpono.

Aloha 'agike

• Nā'āpana'āpana: Ka hanaʻana i nā hoʻolālā kūʻokoʻa no nā kiʻina a me nā mea hoʻonaninani.
• Signage a me ka hanaʻana: Nā hōʻailona hōʻailona kiʻekiʻe kiʻekiʻe a me nā hōʻike hoʻolaha.

8. Nā noʻonoʻo noʻonoʻo i kaʻokiʻana i ka laser

Ke kohoʻana i nā mea no kaʻokiʻana o ka laser, He mea koʻikoʻi e noʻonoʻo i nāʻano likeʻole e like me keʻano o keʻano, Kohano, a me na waiwai.

Hiki i kēia mau noʻonoʻo ke hopena nui i ke kaʻinaʻokiʻoki, o ka kūlana, a me kekahi. Eia kahi kiko'ī kiko'ī ma nā manaʻo noʻonoʻo no kaʻokiʻana i ka laser:

Nāʻano hana

Melas:

• Kila kohu ʻole:

• • Waiwai: Ikaika ikaika, Ke kū'ē neiʻo Corrosionion, a me ka noʻonoʻo.
  • Kūpono: ʻO kaʻoki maikaʻi loa me nā mea hoʻokele fiber ma muli o kā lākou noʻonoʻo kiʻekiʻe.
  • Noi: Aitompetitive, AerERPPACE, Nā Pūnaewele Pūnaewele.

• ʻAihue kīwī:

• • Waiwai: Ikaika ikaika a me ka nui.
  • Kūpono: Hiki keʻokiʻia me nā meaʻeluaʻelua a me nā mea kōkua.
  • Noi: Kūkulu hoʻi, hana ai.uk, aitompetitive.

• Aluminum:

• • Waiwai: Māmā māmā, ke alakaʻiʻana i ka thermal, a me ka noʻonoʻo.
  • Kūpono: ʻO kaʻoki maikaʻi loa me nā lasers fiber ma muli o konaʻano noʻonoʻo.
  • Noi: AerERPPACE, nā leka uila, aitompetitive.

• Liulaala a Keihei:

• • Waiwai: ʻO ka laweʻana o ka Thermal a me ka noʻonoʻoʻana.
  • Kūpono: Paʻakikī eʻoki; pono i nāʻenehana kūikawā a me nā mea kiʻekiʻe kiʻekiʻe.
  • Noi: Nā'āpana uila, Kōhai, mea hoʻonani kiʻi.

Non-metals:

• Acrylio:

• • Waiwai: TransAntY, maʻalahi eʻoki, a e hana i kahi kihi.
  • Kūpono: Cut cut maikaʻi me nā coders co2.
  • Noi: 'Āpana Noihia, Hōʻike, mea hoʻonani kiʻi.

• Wood:

• • Waiwai: ʻO nā hōʻemi kaulike a me nāʻike nui.
  • Kūpono: Cut cut maikaʻi me nā coders co2.
  • Noi: Nā mea ukana, mea hoʻonani kiʻi, nā papahana maʻamau.

• Pepa a me ka pepa:

• • Waiwai: Ho'ākāka a maʻalahi hoʻi.
  • Kūpono: Cut cut maikaʻi me nā coders co2.
  • Noi: Kōkele, 'Āpana Noihia, Nā paʻi lāʻau maʻamau.

• Nā lole a me nā puke:

• • Waiwai: Hiki a hiki ke wela wela.
  • Kūpono: Cut cut maikaʻi me nā coders co2.
  • Noi: Keawai, upholstery, Hoʻolālā Hoʻolālā.

• Nā Plasttics:

• • Waiwai: Rary ākea i loko o nā wahi e melting a me ke kū'ēʻana i keʻano.
  • Kūpono: Cut cut maikaʻi me nā coders co2.
  • Noi: Pūnaehana, nā huahana kūʻai, nā'āpanaʻenehana.

Nā cheramics a me nā hoʻohui:

• Nā Kūlana:

• • Waiwai: Hāwana, henia, a me ka wela-pale.
  • Kūpono: Hiki keʻokiʻia me nd: ʻO Yag a iʻole nā ​​mea kōkua.
  • Noi: Nā leka uila, Nā Pūnaewele Pūnaewele, nā'āpanaʻenehana.

• Nā Hoʻohui:

• • Waiwai: Nā Kūlana e pili ana i ka Matrix a me nā mea hana hoʻoikaika.
  • Kūpono: Hiki ke paʻakikī eʻoki; koi pono i ke koho ponoʻana i nā'āpana laser.
  • Noi: AerERPPACE, aitompetitive, nā lako hāmeʻa.

Nā mānoanoa

Nā Kūlana Kūʻai:

• ʻO wehewehe: Ka mea maʻamau i manaʻoʻia he mau mea i luna 10 mm mānoanoa.
• Nāʻokiʻoki i nā hiʻohiʻona:

• • E lanakila ana i kaʻokiʻoki: Maʻalahi eʻoki me ka kiʻekiʻe a me ka wikiwiki.
  • Wela wela (Haz): ʻO nā mea liʻiliʻi loa, hopena i nāʻoki maʻemaʻe.
  • Type: Loaʻa pinepine nā lālā CO2 i nā mea kūpono, Akā hiki ke hoʻohanaʻia nā mea kūʻai aku no nā metala.

• Noi: 'Āpana Mīkini, Nā plastics, Pepana, a me nā puke.

Nā mea waiwai:

• ʻO wehewehe: Ka mea maʻamau i manaʻoʻia he mea nui 10 mm mānoanoa.
• Nāʻokiʻoki i nā hiʻohiʻona:

• • Mea paʻakikī: Pono i nā limahana mana kiʻekiʻe a me nā wikiwiki wikiwiki.
  • Wela wela (Haz): Haz nui loa, hiki ke pili i nā waiwai o nā mea.
  • Type: Ua makemakeʻia nā mea kōkuaʻo Fibers no nā metala kiʻekiʻe, oiai nd: Hiki i nā mea hanaʻo YAG i hiki ke mālama i nā pale pale nani a me nā hoʻohui.

• Noi: Nā Kūlana Kūlana, NA Nā peni aku, nā lole ākea.

Waiwai waiwai

Ka HōʻaʻO Kokua:

• Ke alakaʻiʻana i ka thermal: Nā mea like me Aluminum a me ke keleawe i ka wela wela, e hiki ai ke hana hou i ka paʻakikī. ʻO ka mana kiʻekiʻe a me nā wikiwiki wikiwiki e koi pinepineʻia.
• Low thermal cenmal: Nā mea like e like me nā plastics a me nā wahi lāʻau, aeʻae no nā wikiwiki wikiwiki.

Himoli:

• ʻO ka noʻonoʻo kiʻekiʻe: Nā mea noʻonoʻo e like me ka alumini, liulaala, aʻo ke keleawe hiki ke hōʻino i ka laser ināʻaʻole i hoʻokele ponoʻia. ʻOi aku ka maikaʻi o nā mea hoʻohanaʻo Firsters no kēia mau waiwai ma muli o ko lākou mau kiʻekiʻe kiʻekiʻe a me ka haʻahaʻa haʻahaʻa o keʻano o hope.
• ʻO ka noʻonoʻo haʻahaʻa: ʻO nā mea likeʻole e like me nā mea e like me ka lāʻau a me nā plastics e maʻalahi eʻoki aʻoki i nā pilikia liʻiliʻi i ka laser.

Malting Point:

• ʻO Malking Point Point: Nā mea hana me nā wahi kiʻekiʻe, e like me ka tungsten a me Molybdenum, pono i nā limahana kiʻekiʻe a me nā mana kūpono.
• Haʻahaʻa haʻahaʻa haʻahaʻa: Nā mea me nā wahi haʻahaʻa haʻahaʻa, e like me nā plastics, hiki keʻoki maʻalahi a ma nā wikiwiki kiʻekiʻe.

Ke kū'ē kū'ē:

• Ke kūleʻaʻana: Nā mea e kūʻole ana i nā mea kanu, e like me ptfe (Teflon), E koi paha i nā noʻonoʻo kūikawā e pale i ka degradation i ka wā eʻoki ana.
• Ka naʻauao: Nā mea pili i nā kemika, e like me kekahi mau plastic, hiki ke hoʻopuka i ka uahi ʻawaʻawa a makemake i ka ea kūpono.

Nā noʻonoʻo kūikawā

Karf laulā:

• ʻO wehewehe: ʻO ka laulā o ka ʻoki i hana ʻia e ka laser.
• Hopena: Hiki i kahi kerf ākea ke hoʻopili i ke kūpono a me ka pau ʻana o nā ʻāpana, ʻoi aku ma nā noi pololei.
• Hono: Hiki ke hoʻemi ʻia ka laula Kerf ma o ka hoʻohana ʻana i nā lasers kiʻekiʻe a me ka hoʻonui ʻana i nā ʻāpana ʻoki.

Kūmole maikaʻi:

• Nā meaole: Hoʻopili ʻia ka maikaʻi o ka ʻoki ʻoki e ka mana laser, ʻoki wikiwiki, a kōkua kinoea.
• Hoʻomaikaʻi: ʻO ka hoʻohana ʻana i ke kinoea kōkua kūpono a me ka mālama ʻana i ka wikiwiki ʻoki paʻa hiki ke hoʻomaikaʻi i ka maikaʻi o ka lihi.

Hoʻolaha Kūleʻa:

• Wela wela (Haz): ʻO ka wahi a puni ka ʻoki kahi i hoʻomehana ʻia ai ka mea akā ʻaʻole i hoʻoheheʻe ʻia hiki ke hoʻololi i ka mea.
• Ka hoemi ana: ʻO ka hoʻohana ʻana i ka mana haʻahaʻa a me ka wikiwiki o ka ʻoki ʻana i hiki ke hōʻemi i ka HAZ a hōʻemi i ka deformation.

FUME a me ka hoʻokele Dust:

• Puhi: Ke ʻoki ʻana i kekahi mau mea, ʻoi aku ka nui o nā plastics a me nā composites, hiki ke hana i ka mahu ino.
• Lepo: Hiki i nā mea maikaʻi ke hōʻiliʻili a hoʻopilikia i ke kaʻinaʻokiʻoki.
• Nā hopena: Hana kūpono, Nā'ōnaehana Brol, a me nā mea palekana palekana (Ppe) mea pono.

9. Nā pilikia a me nā palena o kaʻokiʻana o ka laser

ʻO kaʻenehanaʻo Laser, ʻOiai maikaʻi, e hele pū ana kekahi mau pilikia a me nā palena e hiki ai ke hoʻokō i kāna pono i kekahi mau noi.

Eia kekahi mau koina nui e noʻonoʻo ai:

Nā palena palena

ʻAʻole kūpono nā mea āpau me kaʻokiʻana i ka laser.

Kekahi mau metals noʻonoʻo, e like me ke keleawe a me ke keleawe, hiki ke hōʻike i ka beam laser, hikiʻole ke hōʻino i nā mea hana eʻoki ana a alakaʻi i ka paleʻana i ka maikaʻi.

KAHUIA, ʻO kekahi mau plastics e emi paha i nā mea hanaʻino i ka wā eʻokiʻia me kahi laser, e pono ai i nā hana kūpono kūpono a me nā hana palekana.

Nā noʻonoʻo noʻonoʻo

ʻOiai ke kohoʻana i kaʻokiʻana i ke kala, ʻO ke kumu kūʻai kālā mua no ka nui o nā mīkini hana kiʻekiʻe.

Hiki i kēia pākeke kumukūʻai ke koʻikoʻi kūikawā no nāʻoihana liʻiliʻi a iʻole nā ​​hoʻomaka e nānā i nāʻenehana hana holomua holomua.

Nā palena palena kūlike

Ua loaʻa i nā meaʻokiʻokiʻo Laser e pili ana i ka mānoanoa o nā mea i hiki keʻokiʻia.

E like me ka hoʻonuiʻana o ka mānoanoa, E hōʻemi paha nā wikiwiki wikiwiki, hopena i nā manawa hana lōʻihi.

I nā hihia he nui, nā hanaʻokiʻoki, e like me ka plasma a iʻole kaʻokiʻana o ka wai, Hiki paha i nā mea kūpono no nā mea he nui, Hoʻopili i ka noiʻana o ka hoʻopiʻiʻana i ka laser eʻoki ana i kekahi mau hiʻohiʻona.

ʻO nā wahi wela wela (Haz)

ʻO ka nui o ka ikaikaʻo Laser High Beam i hana i ka wela nui i ka wā o ke kaʻinaʻokiʻoki, e alakaʻi ana i nā'āpana wela (Haz) a puni nā kihiʻokiʻoki.

Hiki i kēia mau zones ke hoʻololi i nā waiwai waiwai, e like me ka ikaika paʻakikī a me ka ikaika, ʻO ka mea nui paha no nā noi kiko'ī.

Ponoʻo Managing Haz no nāʻoihana ma kahi e kūpono ai nā hiʻohiʻona kūpono.

10. ʻO nā hiʻohiʻona hope i nāʻoki laser

Hōʻikeʻike Adcenhola:

• ʻO ka mana kiʻekiʻe a me ka hana kūpono: ʻO ka hoʻomohalaʻana o nā mea ikaika a maikaʻi loa.
• Hoʻomaikaʻi maikaʻi i ka maikaʻi: Hoʻonuiʻiaʻo Beam Beam a me nā hana hana.

Hoʻonui hoʻonuiʻia:

• Pūnaehana Pūnaewele: Hoʻohui o nā lima robotic no nā hanaʻokiʻoki.
• ʻO ka hana akamai: E hoʻohana i ka hoʻohanaʻana i ka Iot a me nā mea hōʻike pūnaewele e koho ai i nā hana.

Sustaintability:

• Hana maikaʻi: Ka hanaʻana o nā mea eco-aloha a me nā kaʻina hana.
• ʻO nāʻenehana hana ikaika: ʻO ka hoʻomohalaʻana i nā'ōnaehana Laser ikaika.

11. Hopena

Ua liloʻo Laser Code i kahi cornerstone i nā hana hou, Hāʻawi i ka'ōlelo wehewehe, ʻOiaʻiʻo, a me ka versitility.

ʻOiaiʻo kāna mau kumu mua a me kekahi mau palena, ʻO nā pōmaikaʻi lōʻihi a me nā mea hana loea e hana ai i kahi mea hana waiwai waiwai no ka nui o nāʻoihana.

Ke hoʻomau nei kaʻenehana e ulu, ʻO ka wā e hiki mai ana o ka cuter cuting e nānā ana, me ka hoʻonuiʻiaʻana, sustaintability, a me ke ano hou i ka wehe i ka'āina o ka hanaʻana.

Manaʻo mākou ua hāʻawi kēia alakaʻi iāʻoe me kaʻike pihaʻana o kaʻokiʻana o ka laser a me kona koʻikoʻi i ka hana hou.

Inā paha he mea hana a iʻole ke hoʻomakaʻana, ʻO ka hikiʻana o kaʻokiʻana i kaʻokiʻana a me ka hoihoi.

Inā loaʻa iāʻoe kekahi mea e hoʻololi ai i ka hana, Eʻoluʻolu eʻoluʻolu kāhea iā mā˚ou.