Idle ea droid valve | Deze exterry om results

1. Hōʻikeʻike

ʻO ka Pūnaeweleʻo Idle Air (Iacv) he mea koʻikoʻi koʻikoʻi i loko o nā mīkini hui kūloko, kuleana no ka mālamaʻana i kahi wikiwiki i ka mīkini indele ma lalo o nā kūlana hana likeʻole.

ʻOiai nā kaʻa o kēia mau kaʻa me ka mana o ka uila uila (Etc a iʻole "hoʻokele-e-wild") pinepine pinepineʻaʻole e hilinaʻi hou i kēia polokalamu,

ʻO nā miliona miliona o nā kaʻa kaʻa-Pula-Powered-ka mea i kūkuluʻia ma mua o ka hoʻopiliʻana i ka lewa mokulele.

Ma kānaʻano, 'ōlelo Idle ea droid valve Mālama i ka nui o ka nui o ka ea e kau ana i ka pā i ka pale.

E hōʻoia kēia i ka mīkini e loaʻa i ka huiʻana o ka ea i ka ea kūpono e mālama ai i ka hana maʻalahi ma nā rpms haʻahaʻa (ʻO ka 600-1,000 RPM no nā kaʻa kaʻa).

Keʻole o kēia kāohi, nā fluctuations ma ka hoʻouka kaua kaua-e like me ke komoʻana i keʻano o ka lewa, '.ā, a iʻole ka laweʻana i ka mana, idele, a iʻole kaʻaiʻana.

2. He aha kahi o ka hale kūʻaiʻo Idle Air?

He mamo nei Idle ea ea (Iac) roy he polokalamu uila e hoʻoponopono ai i ka nui o ka ea e pili ana i ka pā i ka paleʻana i loko o kahiʻenehana kūloko.

ʻO kāna kumu mua e mālama ai i kahi ʻO ka wikiwiki a me ka wikiwiki wikiwiki Ma lalo o nā kūlana hana likeʻole e like me ke anuanu, eana eau ukana, a iʻole nā ​​ukana uila mai nā mea'ē aʻe.

Ke pani kokoke ana ka throttle ma ka idle, Pono ka mīkini e koi i kahi nui o ka ea e kākoʻo ai i ka hui pūʻana.

Hāʻawi ka i ka hale o ka hau, Ke hana nei ma ka hoʻonohonohoʻana me ka waeʻana o ka mīkini hana (EUC), ka mea e hoʻoponopono ai i ke kūlana valve e pili ana i kaʻikepili sensor (keiapuni keila, Hoʻopili i ka wela wela, Nā hōʻailona ukana, etc.).

E hōʻoia kēia i ka holoʻana o ka mīkiniʻaʻole i ka leʻaʻaʻole loa a he waiwai nui paha.

ʻO nāʻano o nā wahi hoʻokele mokulele

• Ke noi aku i ka uila: Hoʻohana i kahi kaʻa kaʻa e neʻe ai i kahi pinttle a iʻole cone i hoʻohuiʻia, Ke hāʻawi nei i ka mana maikaʻi loa ma luna o ke ea. Maʻamau i nā kaʻa o kēia mau lā.
• Solenoid a pwm imac valve: Weheʻia a hoʻopau i ka wikiwiki ma lalo o kahi mlud (Pwm) Kahu inoa, Hoʻoponopono i nā mokulele maikaʻi e ka hanaʻana i keʻano o ke kuleana.
• Rothely / DC MCC MINDE: E hoʻolako i kahi kaʻa liʻiliʻi liʻiliʻi a me keʻano o ka mīkini gear e hoʻohuli ai i kahi pani a iʻole flap, Hoʻohana pinepineʻia i nā mīkini e haʻalele nui ai.
• Hoʻohui i ke kino o ke kino uila (Etb): I nā'ōnaehana hou-hou, Ke hoʻololi nei ka hana o ka Airve Air Control i ka hoʻololiʻana i ka pā o ka throttle, Hoʻopau i ka pono no kahi valveʻokoʻa.

3. Mea waiwai & Nā koho Metallirgy

'Ōlelo Idle ea ea (Iac) roy e pili ana i kekahi o nā wahi hana weliweli loa i nā'ōnaehana o ka automotive i nā'ōnaehana automotive:

Waiwai i ka wā hoʻokele Unike Matifid, Ke hoʻomau nei i ka hoʻolahaʻana i nā varorsers hydrocarbon, rapid thermal thermal (-40 ° C Cold hoʻomaka 150 ° C Ma lalo-Hood), a me ka luhi mau.

Nā mea waiwai

ʻO ke kino valve e hana i ke kua o ke kua, ka hoʻopuniʻana i ke ala, Kekuhi Kahu, a noho.

• Apana Apana Aluminum (A380, Adoc12, 6061-T6)

• • Loaʻa: Māmā māmā, ʻO ka Mancinability maikaʻi, maikaʻi maikaʻi thermal (167 W / m · c · k).
  • Hana ai.uk: ʻO ka makeʻana o ka make, Cnc makiʻi no nā bores pololei.
  • Mālamaʻona: ʻO ka hoʻomaʻamaʻaʻana a iʻole ka paleʻana i ka paleʻana i ka corrosion mai ka stret (persm b117, 500 hr pale).
  • Hoʻohana kū'a'ā: ʻO nā kaʻa kaʻa i kahi e koʻikoʻi ai ke kaupaonaʻana a me ke kumukūʻai.

• Kila kohu ʻole (AISI 304, 316L)

• • Loaʻa: ʻO ke kuʻekuʻe kiʻekiʻe kiʻekiʻe ma nā wahi o Acidic egrom, ʻO ka nui loa.
  • Kākau: Kaumaha (density ~ 8 g / cm³ vs. 2.7 G / cm³ no aluminim) aʻoi aku ka uku.
  • Hoʻohana kū'a'ā: ʻO nā ukana kaumaha kaumaha, ʻO nā mīkini kiʻekiʻe, a me nā mākeke me nā wahi ākea ākea (E10-e85).

• Kolepa Kila (Gf Nylon 6/6, Pbt, Pps)

• • Loaʻa: Injection-mlded, māmā māmā, hoʻolālā kūhelu kiʻekiʻe (nā mea hoʻohui).
  • Waiwai: Me ka 140-160 ° C; Nā mea paʻa 85% ka ikaika o ka 150 ° C.
  • PAHUI: Laki haʻahaʻa. mea meta; ʻO Creep ma luna o ka manawa ma lalo o ka ukana mechanical.
  • Hoʻohana kū'a'ā: ʻO nā kaʻaʻo AEM kiʻekiʻe (kumukūʻai-nānā, Nā papahana hoʻemi haʻahaʻa).

Nā'āpana kūloko

• Pin (NaniAle / Cone tipe)

• • Kila kohu ʻole 410/420: Hākūʻia (HRC 55-60) no ka paleʻana i ke kū'ē kū'ē i ka noho.
  • Nā mea i hoʻopiliʻia (Nā Alluna, Si₃n₄): ʻO ke kū'ē kū'ē; Nā Kūlana Kūʻai 2 × i nā kūlana lepo (Iso 5011 Hōʻike Dust).
  • Paulapua: Ra < 0.4 μM e hōʻemi i nā ala leakage.

• ʻO ka nohoʻana

• • Keleawe a paʻakikī paha: Pololei-pomini, ka hana maʻamau i ka hana likeʻole ± 111 mm.
  • Nā hōʻailona elastomeric (FMM, Hnbr): Hoʻohui i kahi o ka zero-leakage; ʻO FKM pale i nā fels i luna 200 ° C.

• E hoʻi i ka pūnāwai

• • ʻO ke kila kila kila kiʻekiʻe (Liamae 1075): Kumukūʻai-maikaʻi, ʻO ke kū'ēʻana i nā pale.
  • 17-7 PH Strainless Steel: ʻOi aku ka kiʻekiʻe o ka hoʻomaha ma >120 ° C, makemakeʻia no nā noi lōʻihi.

Pūnaehana Hoʻohui

• ʻO nā kiʻi hoʻokele kaʻa

• • Waiwai: ʻO ka makani keleawe me nā papa H Insulation (180 ° C).
  • Durability: Keiki 1,000 hr thermal Shock cycling (-40 i 150 ° C).

• Hmuture & Rotory

• • Nā'āpana silicon silicon sillic (0.3-0.5 mm mānoanoa) E hoʻomaikaʻi i ka maʻi maʻi magnetic i ka wā e hōʻemi ana i nā poho o ka EDDY i kēia manawa.

• Kāhele / Bussings

• • ʻO nā Busined Bronted Bronts: Aila-impregnated, iho iho, Ke ola nei ke ola 100m + mau pāʻani.
  • MILITER BILLISH CLINEST: Lalo haʻahaʻa, ʻoi aku ka kiʻekiʻe, Akā hoʻohui i ke kumukūʻai (10-15% kumukūʻai kiʻekiʻe kiʻekiʻe).

4. ʻO nā kaʻina hana hana o ka hale o ka wai

'Ōlelo Idle ea ea (Iac) roy he koho koho koho kūpono.

Pono kāna hana i kahi kaulike o ʻO nā kikowaena kiʻekiʻe (hoʻokahi haneli mau tausani i kēlā me kēia makahiki) me nā mea paʻa paʻa (± 0.01 mm ma luna o Pintle a noho) E hōʻoia pono i ka hoʻoponoponoʻana i ka hōʻoia kālā.

Hoʻopili maʻamau ke kaʻina hana nā'ōlaʻi kewai, Polihu Milom Molding, Machimen, hukiʻana, Kāhea, a me ka hopena o ka hopena o ka laina.

Hana hale

• Nā mea leʻaleʻa metallic (Aluminum, Kila kohu ʻole)

• • Make buring (Alumini a380 / adc12): Hana i nāʻano kokoke kokoke me nā dimensional dimensional ± 0.1 mm. ʻO ka hana wela wela (T6) hoʻomaikaʻi i ka ikaika.
  • Kāhaka kūʻai kūʻai (Nā Hana Kūʻai Kūʻai 304 / 316l): Ua hoʻohanaʻia ma nāʻano hana koʻikoʻi no ka paleʻana i ke kū'ē kū'ē.
  • Kahua Mua: Cr mi mliring, hoʻomālamalama, a me ka hoʻihoʻiʻana e hoʻokō ai i ka maʻi solamudry someomyry no ka lele a me ka noho.

• Hos houss (Pbt, Pps, Nylon 6/6 Gf)

• • ʻO nā molding molding: Hana i nā geomex paʻakikī (Hoʻohui hoʻohui hoʻohui, channels) I loko o kahi pana hoʻokahi.
  • Hoʻokomo i ka moding: ʻO nā maʻi metala mavermolds (E.g., ʻO nā mea kanu keleawe) i loko o ke kino polymer.

Nā'āpana kūloko

• Pin & Noho

• • Kālā Kūʻai Kūʻai (Kila kohu ʻole 410/420): Lohi, 'ōwiliʻoleʻia, a me ka host e hoʻokō i ka ra < 0.4 μM e hoʻopau.
  • ʻO ka mālama wela: Inructional paʻakikī a iʻole nitriding e >55 Hrc.
  • Noho machiʻi: ʻO ka hoʻoponopono houʻana a me ka paleʻana no ka concentricity ± 0.01 mm.

• E hoʻi i ka pūnāwai

• • ʻO kaʻai maloʻo o nā kelepona gula kiʻekiʻe, ukaliʻia e ka hopena wela wela i ka mālama wela ma ~ 250 ° C.
  • Ke hoʻopau neiʻo Sinal me ka phosphate a iʻole zn-i hoʻopaʻaʻia no ka pale o ka corrosio.

• Kekuhi Kahu & Nā Co keleawe

• • Ka makani o ka lole: Hoʻopiliʻia nā mīkini uila o ka Windows Bollased Bollased BopPic Wire me ka papa H Insulation (180 ° C helu helu).
  • Rotory & Hmuture: Kiʻiʻia i nā'ōwili silicon-steel i kālaiʻia a me nā laser-welded.

• Kāhele / Bussings

• • Patder Itallurgy (Pipi cronzed): Hoʻopili i keʻano pomergnated me ka aila no ka lubrication pono'ī.
  • Nā mea hana miiai: ʻO ka mea kila kūponoʻole, Ua'ākoakoa me nā'ōnaehana koho balota a Robic.

Nā mea kino kino & Nā pāpale

• ʻO nā mea uila uila uila (pin, noho) → Ulucem 10-20 μm e uhi ana, ʻO nā waiwai anti-corrosiot anti-corrosion.
• Dlc (ʻO ka carbon-like carbom) Pāpale → hōʻemi i nā criction crication 0.6 → 0.2, ʻO ka helu kālāʻana i ke ola lawelawe.
• Anodichiz (Hale Kūʻai'Aiminum) → hoʻomaikaʻi i nā lole a me ke kū'ēʻana, ua ho'āʻoʻia >500 mau hola astm b117 paʻakai.
• PTFE CATUTINGS (nā papahele) → hōʻemi i nā pilikia pili i nā mahana wela (-40 ° C).

Kāhea, nā uila uila a me nā calibration

• SUB-SPOUS: Kahawai, kemaloa, Ua'ākoakoaʻia nā naʻau a me nā pinkle i nā pae maʻemaʻe me nā mea paʻa i hoʻopaʻaʻia.
• Potting / Encapsulation: Hoʻopili pinepine nā mea uila me ka silicone a iʻole epoxy e hōʻea i ka IP67 a iʻole IP6K9k nā helu kūlohelohe.
• Calibration: hale kūʻai hale kūʻai (pau-oki, Idle Maps, Ka heluʻana i ke kūlana pani) hanaʻia a kākauʻia iā Eeprom / ECU calibration file; ʻO nā hōʻike hōʻike hana hope loa i hōʻoia i nā hiʻohiʻona ola.
  Pono ke kīwīʻo Calibration e hoʻohālikelike i nā kūlana i nā kūlana i nā kūlana.

Honua mālamalama & Manaʻo

• Ke nānāʻole neiʻo Dimensonal: Cmm (ʻO ka mīkini hōʻailona hōʻailona) e hōʻoia i nā mea hana ± 0.01 mm ma kaʻaoʻao o ke noho.
• Leak tex: ʻO kaʻike mokuleleʻo Air-Leak 1 Bar; ʻO ka leakage kiʻekiʻe <0.1 L / min.
• Hana hoʻoikaika: ʻO nā kaʻa kaʻa kaʻa ma nā 0-255 mau wāwae; PINTLET STATUSCT TRUST ± 1 papa hana.
• ʻO ka ho'āʻoʻana: 5 miliona miliona / paniʻia, Ke Kauka Kauka (-40 i 150 ° C), Nā hōʻike hōʻoia (10-500 hz, 10 g).
• 100% ʻO ka ho'āʻoʻana o ka laina: Kahe calibration ma nā kūlana he nui (E.g., 25%, 50%, 75% wehe) No ka hōʻoiaʻana i ka hoʻokōʻana me ka loiloi o ECU.

5. Durability, Nā hana maʻamau maʻamau, a me nā mea hoʻoikaika kino

6. Kālā, alakaʻi i nā manawa a me nā noʻonoʻo a me nā loiloi

• Nā Kūlana Kūʻai Kūʻai: koho koho (Al die-has-plastik), ʻano hana (ʻO Step ma Solenoid), ʻO nā ana / emc mau ana, a me ka ho'āʻoʻana.
• Hoao & Nre: nā kumukūʻai make-make (ʻO USD TEND i hoʻokahi haneli mau tausani) ʻO ka hōʻikeʻana ma luna o ka hana hana; Manaʻo i ka mea hana prototype + hoʻonohonoho i nā manawa alakaʻi.
• Alakaʻi i nā wā: prototype 2-8 mau pule (3D SCHAM / ʻO ka machining liʻiliʻi), Nā hana hana e pili ana i nā hana 8-16 mau pule no nā molds mua / make; ʻO nā mea i alakaʻiʻia i nā manawa i alakaʻiʻia me ka hiki.
• Mea hana & hoʻopakele: E noi i ka palekana palekana no nā kumu kūʻai a me nā mea hana; Nā Kūlana Kūʻai no nā'āpana kūponoʻole (Aloha, pikola, ʻO nā modula).
• Regulatory & Kamana: E hōʻoia i ROHS, E hōʻea i ka hoʻokōʻana no nā mea waiwai a me nā mea hou aku i kahi e pono ai.

Ua kōkua kahi hoa hana maikaʻi maikaʻi e hoʻomaikaʻi i ka Bom, E hōʻemi i ka post-machining a hōʻike i nā'āpana maʻamau i ka uku haʻahaʻa haʻahaʻa.

7. Ka hoʻohālikelikeʻana o ka idle hau. ʻO nā valves mīkini'ē aʻe

8. ʻO kēia Nā hoʻokumu: ʻO ka Pūnaewele Pūnaewele Pūnaewele Pūnaewele

ʻO kēia Nā hoʻokumu Hāʻawi i nā lawelawe hana e pau i ka hana matem (Iac) Nā Vilves,

ka hoʻohuiʻana i nā metalling, ʻO ka paleʻana, Cnc iching, a me nā hana kino e like me dlc, Ptfe, a me ka anoding e koho i ka nui, Ke kū'ē neiʻo Corrosionion, a me ka hana haʻahaʻa haʻahaʻa.

Ma ka hui pūʻana me nā OEMS, ʻO kēia Tailors Valve Geometry, nā mea hoʻokūkū kūpono, a me nā mea hōʻailona i nā platform secticams kūikawā,

ʻOiai e hāʻawi ana i ka ho'āʻoʻana, ʻO ka hōʻoiaʻana o ka kaiāulu, a me nā hana hoʻohālikelike mai nā prototypes i ka hana kiʻekiʻe, hōʻoiaʻiʻo i ka hilinaʻi, ʻO nā kumukūʻaiʻo Idle kiʻekiʻe e hoʻokō ai i nā mea e hoʻokō ai i nā hanana hou a me nā kūlana hana.

9. Hopena

Mai kahi mea e loaʻa ai a me kaʻikeʻole o ka mālamaʻana i ka paleʻana i ka lewa metralurgy, ʻO ke kāʻeiʻana /ʻano hana, Machning Tolerances, nā mea kino kino, ʻO nā uila uila a me ka ho'āʻoʻana hoʻohui e hoʻoholo i ka hilinaʻi o ke kula.

Ke kohoʻana i nā lako kūpono, Ke hele nei ke ala hana a me ka ho'āʻoʻana i ka hoʻoponoponoʻana-a me ka hoa hana me kahi mea lawelawe e hāʻawi i ka DFM, prototyping a me nā helu qc-minimizes hōʻoia i nā kumukūʻai hōʻoia a hoʻokō i ka hana hoʻokele e pono ai.

FaqS

He mea maʻamau ka hale kūʻai hale no nā pale o ka lewa?

ʻO ka Die-has-has aluminim ka mea maʻamau loa no ke kaulike o ke kumukūʻai, kaumaha a me ke aniani. Hoʻohanaʻia nā plastics no nāʻano haʻahaʻa haʻahaʻa, a me ke kilama / hanaʻoleʻia no nā noi kiʻekiʻe kiʻekiʻe.

Pehea ka lōʻihi o kahi kalepa o ka ea?

ʻO ke ola keʻano maʻamau >100,000 ʻO nā hana a iʻole ka lawelaweʻana o ka makahiki (5-10 mau makahiki) E pili ana i ka hoʻohanaʻana i nā kaʻa a me ka nohona. E hoʻonohonoho i nā Oems i nā pahuhopu MTBF MTBF.

He aha nā hoʻokolohua e koi ai au i kahi mea hoʻolako?

Dimensional cmm, Mtc, leak tex, Q vs pos o ke kaheʻana, Ke Kauka Kauka, Nā hōʻike EMC, ʻO ka mālamaʻana (>100K nakona) a me ka calibrate hana hope.

Hiki i nā mea loaʻa ke kākoʻo i ke kākoʻoʻana i nā mea e pono ai?

ʻAe-hapa nui loa e hāʻawi i nā lawelawe oem piha piha: Dfm, hoao, E holo ana ka prototype, nā koho koho, ʻO nā mea hana hana a me ka ho'āʻoʻana.

Pehea e pale ai i ke kahua o ka carbon i kūkuluʻia?

Hoʻolālā no ka mokulele wikiwiki, E hoʻohana i nā lole haʻahaʻa haʻahaʻa, E wehewehe i ka fucktation inlet, a ke kau aku nei i ka hoʻomaʻemaʻeʻana i ka'ā'ī o ke kino i ka hoʻomaʻemaʻeʻana ma keʻano o ka mālamaʻana.