7075 Aluminum

7075 ʻO ke Aluminim kekahi o ka honua i hoʻohana nuiʻia a kaulana loa a me nā alluinum aluminum.

Kaulana no kona ikaika ikaika ikaika-i-ka nui, aluminum 7075 he punahele ma ka aerospace a me nā hana hana hāmeʻa.

I kēia alakaʻi alakaʻi, E hana mākou i nā mea āpau āu e pono ai eʻike 7075 aluminum, mai konaʻano a me kāna mau waiwai i kona mau noi a me nā hana hana lole.

1. He aha la 7075 Aluminum?

7075 ʻO Aluminum kahi hapa o nā papa 7xxx, hōʻikeʻia e zinc e like me ka mea nui.

He alloy wela loa ia, Hoʻolālā e hāʻawi i ka ikaika kiʻekiʻe a paʻakikī, Ke kūpono nei ia i nā noi e noi ai i ka hana koi a me ka pololei.

ʻOiaiʻo kāna hoʻohana muaʻana ma kaʻoihana Aerospace, Uaʻaeʻo ia i kona kūʻokoʻa e loaʻa i ka kaulana i nā'āpana kiʻekiʻe'ē aʻe.

2. 7075 ʻO nā waiwai a Alminim

Kōkua Hōʻa

Ka huiʻana o nā 7075 Hoʻohuiʻo Aluminim i kahi hui o nā mea e hāʻawi ai i ka ikaika, hālulu, a me ke kū'ēʻana.

Mua	ʻO ka maʻamau maʻamau (%)	Hana
Aluminum (AL)	Kaulike	Kūlana kumu, ka hoʻolakoʻana i ka māmā a me ka formability.
Zinc (Zn)	5.1-6.1	ʻO ka hoʻoikaikaʻana o ka mua, hoʻonui i ka ikaika paʻakikī a me ka ikaika.
Magnesum (Mg)	2.1-2.9	Hoʻomaikaʻi i ka paleʻana o ka corrosion a hoʻonui i ka ikaika.
Liulaala (Cu)	1.2-2.0	Hoʻonui i ka paʻakikī a me ka manikini akā e hōʻemi ana i ke kū'ē kū'ē.
Chromium (Cr)	0.18-0.28	Hoʻomaikaʻi i ke kū'ēʻana i ke kaumaha o ke kaumaha.
Silikino (A)	Max 0.4	E hoʻokaʻawale i ka hoʻolālā grain, E hoʻoikaika liʻiliʻi.
'Eron (Lia)	Max 0.5	Nā hewa me nā hopena liʻiliʻi ma ka ikaika.

ʻO ka uku kaulike o kēia mau mea i hoʻokumu i kahi hana kiʻekiʻe kiʻekiʻe e koiʻia no nā noi noi.

Nā Pūnaewele Pūnaewele

ʻO nā hiʻohiʻona pilikino o Aluminim 7075 Hāʻawi i kona hoʻohanaʻana i ka mea e hoʻohana ai i ka AEROSPACE a me nāʻoihana AutoMetive.

Waiwai	Waiwai	ʻO ka weheweheʻana
Huakai	2.81 g / cm³	Ua hoʻohālikelikeʻia ka māmā māmā i ke kila, Ke kūpono nei i nā noi koʻikoʻi.
Malting Point	477-635 ° C	Aeʻae no nā noi kiʻekiʻe kiʻekiʻe a me nā hana maʻalahi.
Ka HōʻaʻO Kokua	130 W / m · c · k	Loli, He kūpono no nā'āpana wela.
Mea kūʻai uila	36% Iac	ʻO ka hana uila uila no nā lako hana.
Ka maikaʻi o ka hoʻonuiʻana i ka	23.6 μM / m · m · ° C	Mālama i ka paʻaʻana o ka dimensional ma lalo o nāʻano likeʻole.

ʻO kēia mau waiwai e hana ai i ka alumini 7075 kahi mea kūpono no nā'āpana e koi ai i kahi hui o ka māmā, kūkaha, a me ka hoʻokele wela.

3. Nā helu maʻamau o nā 7075 Aluminum

ʻO kēlā me kēia helu nui o 7075 Hāʻawiʻo Aluminim i kahi kaulike kūʻokoʻa o nā mea hana mechanical. Eia kahi hoʻomaha kiko'ī:

7075-Ooe (Anned)

• Ke kaʻina hana: kahi kūlana
  ʻAʻole i hoʻopiliʻia ka wela wela. Ua hoʻopauʻia ka alloy e hoʻonuiʻia i ka hana noximility a me ka maʻalahi o ka machining.
• Nā Pīkuhi Propertinies:

• • ʻO ka ikaika hope loa: ~ 220 MPA
  • Ka ikaika: ~ 105 mpa
  • Ewangantion: ~ 17-18%

• Nāʻano hiʻohiʻona:

• • ʻAno palupalu o 7075 aluminum, Ke hana nui nei i nā hana hana.
  • Kūpono no nā noi i kahi e hoʻolālāʻia ai ka mālama wela o ka wela.

• Noi: Hoʻohanaʻia i loko o nā kūlana e koi ana i keʻano nui a iʻole ke kalaʻana, e like me nā mea paʻakikī aertpace.

7075-T6 (Ua mālamaʻia ka hopena wela i ka wela a me ka makahiki)

• Ke kaʻina hana: ʻO ka hopena ka mea wela i mālamaʻia a me ka weliweli
  ʻO ka alloy ka mea i hāpaiʻia i kahi kiʻekiʻe kiʻekiʻe, i mālamaʻia i kēlā mahana no kekahi manawa e hoʻopau i nā ala alloying i loko o ka matrix, a laila hoʻomaʻemaʻe wikiwiki (ua hala) e pani i kēia mau mea i ka hopena.
  A laila heʻelemakuleʻia ma keʻano haʻahaʻa haʻahaʻa e hoʻopili i nā mea'ē aʻe a hoʻonui i ka ikaika.

• Nā Pīkuhi Propertinies:

• • ʻO ka ikaika hope loa: ~ 572-580 mpa
  • Ka ikaika: ~ 503-540 MP.
  • Ewangantion: ~ 11-13%

• Nāʻano hiʻohiʻona:

• • ʻO ka pae kiʻekiʻe-kiʻekiʻe-kiʻekiʻe, maikaʻi loa no nā'āpana ukana.
  • Hoʻemiʻia ka ductity i hoʻohālikelikeʻia ma 7075-o.

• Noi: Maʻamau ma Aerospace, aitompetitive, a me nā mea hana e hana ai i nāʻoihana no nā'āpana e like me nā wing spars a me nā mea pāʻani bicycle.

7075-T651 (Mālamaʻia ka hopena wela, Hana maikaʻi, a me ka makahiki)

• Ke kaʻina hana: Hoʻoholoʻia ka hopena i mālamaʻia, lele aku, a me nāʻelemakule kahiko
  Like me t6, akā, ua paʻa ka alloy ma hope o ka quere e hōʻoluʻolu i nā kaumaha kūloko a hoʻomaikaʻi i ka pololei.
• Nā Pīkuhi Propertinies:

• • ʻO ka ikaika hope loa: ~ 572-580 mpa
  • Ka ikaika: ~ 503-540 MP.
  • Ewangantion: ~ 11-13%

• Nāʻano hiʻohiʻona:

• • Like me t6, Akā me ka hoʻomaikaʻiʻana i ka dimensional i hoʻomaikaʻiʻia ma muli o ke kaumaha kaumaha.
  • ʻO ka manika maikaʻi loa i hoʻohālikelikeʻia i T6.

• Noi: Makemakeʻia no ka machini mua, e like me nā pono hana kiʻekiʻe, Nā Māhele kā Aerospace, Aʻo Welds.

7075-T73 (Mālamaʻia ka hopena wela, Huhū)

• Ke kaʻina hana: Hoʻoholoʻia ka hopena i mālamaʻia, A laila e hoʻonuiʻia e hoʻomaikaʻi i ke kū'ēʻana.
• Nā Pīkuhi Propertinies:

• • ʻO ka ikaika hope loa: ~ 503-540 MP.
  • Ka ikaika: ~ 435-4775 mpa
  • Ewangantion: ~ 13-15%

• Nāʻano hiʻohiʻona:

• • ʻOi aku ka liʻiliʻi ma mua o T6 akāʻoi aku ka maikaʻi o ke kū'ēʻana i ke kaumaha.
  • He kūpono no nā noi i hōʻikeʻia i nā wahi hoʻoponopono.

• Noi: Hoʻohanaʻia ma nā mea kanu moana, nā noi a Aerospace e koi ana i ke kū'ēʻana, a me nā'āpana hoʻonohonoho.

7075-T7351 (Mālamaʻia ka hopena wela, Hana maikaʻi, a ua hoihoi)

• Ke kaʻina hana: Hoʻoholoʻia ka hopena i mālamaʻia, lele aku, a ua hoihoi:
  Ma hope o ka hoʻonāʻana i ka mālama wela a me ka hoʻonuiʻana, Ua hoʻonuiʻia ka alloy ma ke kiʻekiʻe kiʻekiʻe e hōʻemi i ke kaumaha kūlohelohe a hoʻomaikaʻi i ka paʻakikī.
• Nā Pīkuhi Propertinies:

• • ʻO ka ikaika hope loa: ~ 503-540 MP.
  • Ka ikaika: ~ 435-4775 mpa
  • Ewangantion: ~ 13-15%

• Nāʻano hiʻohiʻona:

• • E hoʻohui i nā pono o ke kaumaha o ke kaumaha a me ke kū'ēʻana.
  • Hoʻololiʻia i ke kalaʻana a me keʻano o keʻano.

• Noi: Kūpono no nā'āpana AERSEPECE, Nā noina koa, a me nā mīkini hana kiʻekiʻe.

ʻO ka papaʻaina o nā meaʻike

Helu helu	ʻO ka ikaika hope loa (Mpa)	Ka ikaika (Mpa)	Ewangantion (% I 50mm)	Nā hiʻohiʻona koʻikoʻi
7075-Ooe	~ 220	~ 105	~ 17-18	ʻO ka ductile maikaʻi a me ka formable.
7075-T6	~ 572-580	~ 503-540	~ 11-13	Ikaika loa, haʻahaʻa haʻahaʻa loa.
7075-T651	~ 572-580	~ 503-540	~ 11-13	Kaumaha-hoʻomaha, ʻO ka Mancinability maikaʻi.
7075-T73	~ 503-540	~ 435-4775	~ 13-15	Hoʻopiliʻia ke kū'ēʻana.
7075-T7351	~ 503-540	~ 435-4775	~ 13-15	Corrosionion-resistant a me ke kaumaha.

Nā hopena o nā hopena o ka wela wela

1. Hopena wela wela (Sht):
   I loko o kēia hana, Ua hoʻomehanaʻia ka alloy e hoʻokaʻawale i kāna mau alahele i loko o kahi hopena paʻa. Rapid holoi, a iʻole ka quenching, "Locks i" nā mea'ē aʻe, ka hoʻonohonohoʻana i ke kahua no ka paʻakikī.
2. Queech:
   Wikiwiki ka wikiwikiʻana mai ka hopena palekana e hana ai i ka hopena o ka hopena supersaturated stid. He koʻikoʻi kēiaʻano hana no ka hoʻokōʻana i ka ikaika kiʻekiʻe akā hoʻopuka i ke kaumaha o ke koʻikoʻi ma ka waihona.
3. ʻEhā (Kūlohelohe a kūlohelohe paha):
   Hiki i nā makahiki o ka ADLOYING e pili ana i nā mea e pono ai, Hoʻopili i ka ikaika a Alloy a me ka paʻakikī. ʻO ka wā kahiko, hanaʻia ma nā wela kiʻekiʻe, ʻoi aku ka wikiwiki a me nā mea hou aku.

Ua hōʻikeʻia nā kumu nui e ka huhū

1. Ikaika a me ka paʻakikī:

• • T6 a me T651 nā gigpers hāʻawi i ka ikaika kiʻekiʻe ma muli o ka hoʻonuiʻana i ka hopena o nā mea'ē aʻe e like me Zinc a me Tignesium.
  • T73 huhū ʻO nā mōhai i kekahi mau ikaika no ka hoʻonuiʻana i ke kū'ē, He kūpono no nāʻenehana i keʻano o ke kaumaha.

2. Ke kū'ē neiʻo Corrosionion:

• • ʻO T6ʻO ka huhū maikaʻi loaʻo Corrosion-resistant akā hiki ke hoʻopaʻaʻia i ke kaumaha.
  • Ua hoʻolālāʻiaʻo T73 Ua hoʻolālāʻia ka huhū e hoʻomaikaʻi i ke kū'ēʻana, kūikawā ma nā noi moana a iʻole nā ​​noi noi.

3. Machinlibility a me ke kaumaha-hoʻomaha:

• • ʻO T651 Ua ho'ēmiʻo Turper i nā kaumaha kūloko, ʻaeʻia no ka mahana kiʻekiʻe-kūponoʻole me kaʻole o ka hopena o ke kaua a iʻole ka deformation.
  • Hiki i ka T73ʻO Tigper i kahi machinicable ma muli o konaʻano somet i luna akā hāʻawi i ka ikaika kiʻekiʻe loa i nā kūlana kūlike.

4. Paʻakikī a me ka neʻe:

• • Hāʻawiʻo T6 i ka nui i ka paʻakikī i ka paʻakikī no nā noi pili.
  • Hāʻawiʻo T73ʻO ka huhū i nā haʻahaʻa kiʻekiʻe, e hana hou ana i nā mea hou aku e pale ai ma lalo o ka hopena a iʻole ke kauʻana.

4. Pono ana o 7075 Aluminum

7075 Ua kūʻo Aluminim e like me kekahi o nā mea nui loa a me nā alaloa kiʻekiʻe e loaʻa ai, Hāʻawi i kahi o nā mea pono e hana i kahi koho kaulana ma nāʻoihana:

ʻO ka ikaika ikaika ikaika-i-paona

• 7075 kaulanaʻo Alumini no konaʻano hoihoi ikaika loa, Ke hana nei i kahi koho nui no nā noi e koi ana i nā kukui māmā.
  ʻo kahi laʻana, Hoʻopilikia ia i kahi ikaika o ka ikaika o ka 572 Mpa (83,000 Psi) I ka T6 huhū, ʻO ka halaʻana i nā mea hele he nui i ke koena o ka māmā.

ʻO ke kū'ēʻana i nā pale

• ʻO kēia alloy keʻano nui loa i ka momona, ʻO ka hana kūpono no nā mea i kauʻia i nā mea hou aku i ke kaumaha.
  Ua waiwai nui kēia waiwai i loko o ka ʻO Aerospace a me nāʻoihana Autoomotive, Ma hea kahi hilinaʻi ma lalo o ke kāwele cyclic e koʻikoʻi.

ʻO ka machiniblibility

• 7075 Ua hiki i ka Manchinibility Machinebility i ka hana o ka paʻakikī a me nā'āpana kūpono me ka maʻalahi.
  Ua helu pinepineʻiaʻo ia e like me kekahi o nā alluinum maikaʻi loa no ka machining cnc machining, ka hoʻemiʻana i ka manawa hana a me nā uku.

ʻO ka wela wela

• ʻO ka hiki ke hana i nā waiwai mechanical i loko o ka huhū a me nā mea wela e like me ka nui e like me t6 a me t651 e hoʻonui i kānaʻano.
  Hāʻawi kēia hoʻololi i nā mīkini hana e hana i ka alloy no nā koi kūpono.

Ke kū'ē neiʻo Corrosionion

• ʻOiaiʻaʻole e like me ka corrosiod-resistant e like me 6061, 7075 Hāʻawiʻo Aluminim i ke kū'ēʻana i nā mea kūlohelohe i nā kumu kūlohelohe.
  Hiki i ke aniodizing a iʻole nā ​​mea hana'ē aʻe e hoʻonui hou i kona mau manawa i kū'ē i ke kuʻekuʻe.

5. Ka Hoʻohālikelikeʻana o 7075 Aluminum

7075 ʻO ka waiwai kūʻokoʻa a Alminim i kūpono i kūpono no nāʻano hana likeʻole, komo me keʻano, Machimen, a me nā hana kino.

Machimen:

• 7075 He maikaʻi loaʻo Aluminim no nā kaʻina hana e like me CNC MilightʻAʻole, ke huli, a me ka drilling. Hiki i kona mīkini kiʻekiʻe ke kūpono no ka hana kūpono a me ka maikaʻi kūpono.

Hana:

• 7075 Hiki ke hoʻokumuʻiaʻo Anuminim i nāʻano likeʻole, Akā hiki iā ia ke koi i ka hoʻonāukiukiʻana e hoʻomaikaʻi i ka nomibility. Kōkua kēia kaʻina hana i ka hoʻokōʻana i keʻano i makemakeʻia me kaʻole e hoʻohālikelike i nā waiwai o nā mea.

ʻO ka mālama wela

• 7075 he wela-mālama, ʻO ka hoʻonuiʻana i ka ikaika i hoʻonuiʻia a me nā mea hana e pili ana i nā mea hana likeʻole ma o nā kaʻina hana e like me ka hopena wela a me ka makahiki. ʻO nā hoʻowalewale e like me T6 a me T651 hāʻawi i ka ikaika kiʻekiʻe, ʻOiaiʻo T73 e hāʻawi i ka hoʻoponoponoʻana i ke kū'ē.

Welding

• ʻAʻole i'ōleloʻia ka Wilding ma muli o ka pilikia o ka cracking. ʻO ka Friction Srit Cright he mea koho'ē aʻe no nā hui kiʻekiʻe kiʻekiʻe.

6. ʻOkoʻa nā mea likeʻole ma luna 7075 Aluminum

Milli:

• Keʻano kūlohelohe e like me ka mea e hele mai mai ka milla, He kūpono no nā noi i kahi o keʻanoʻaʻole koʻikoʻi.

Anodichiz:

• Hāʻawi i kahi pale pale pale pale e hoʻonui ai i ke kū'ēʻana a hiki ke kalaʻia no nā kumu aesthetic. Ua hoʻomaikaʻiʻo Anodizing i ka hana a ka mea hana a me keʻano.

Kāleka:

• Hoʻokō i kahi kūpono, palana lealea, hoʻohana pinepineʻia no nā noi a iʻole nā ​​noi kiʻekiʻe. Hiki ke hoʻonuiʻiaʻo Polani i kaʻikeʻike a hōʻemi i ka paʻakikī.

Kāleka:

• I hoʻopaʻaʻia me nā pena a iʻole nā ​​pale pale'ē aʻe e hoʻonui ai i keʻano a pale i ka paleʻana.
  ʻO ka pena kiʻi heʻano maʻamau no ka hoʻomaikaʻiʻana i nā Aesthetics o nā mea hana a me ka lōʻihi.

Ke kūlohelohe meleʻana:

• Nā mea lapaʻau e like me ka chromate constion (Alodine) hoʻomaikaʻi i ka paleʻana o ka corrosion ma luna o ka pākeke no nā kapa hope.
  He mea nui kēia mau lole no ka hoʻonuiʻana i ka hana a ka mea hana ma nā wahi harsh.

7. Kahi e hoʻohana ai 7075 Aluminum

AerERPPACE:

• 7075 Hoʻohana nuiʻiaʻo Aluminim i nā mokulele mokulele, Nā'ēheu, a me nā mea waiwai o nā wahi ma muli o kona ikaika kiʻekiʻe a me nā waiwai māmā.

Aitompetitive:

• Nā'āpana kaʻa kiʻekiʻe, e like me nā mea hoʻopiʻi a me nā chassis, pōmaikaʻi mai ka ikaika a me ka lōʻihi o 7075 aluminum.

Nā lako hāmeʻa:

• 7075 Hoʻohanaʻiaʻo Aluminim i nā pahu uila, ʻO ke kolamu Kīkī, a me nā papa ski, Aia ma kahi o ka ikaika kiʻekiʻe a me ka paona kukui.

Marine:

• ʻO nā kāpena Boull a me nā deck fittits e pōmaikaʻi ana i ka paleʻana o nā mea e kū ana i ka pale a me ka ikaika, Ke kūpono nei ia no nā noi mariine.

Kahahana:

• Nā Kūlana Kūlana, nā mīkini mīkini, a me nā pono hana hoʻohana pinepine 7075 alumini no kona ikaika kiʻekiʻe a me ka hilinaʻi.

8. Hoʻohālikelike o 7075 Alumini me nā helu'ē aʻe

ʻO kēlā me kēia papa helu alumini i loaʻa i kāna mau mea kūikawā o nā waiwai a he kūpono loa ia no nā noi kiko'ī. 7075 Ua kūʻo Aluminim no kona ikaika kiʻekiʻe a me ka māmā.

Akā naʻe,, nā papa'ē aʻe e like me 6061, a 2024 Hāʻawi i nā mea likeʻole ma nā'ōlelo no ka formability, wawahua, a me ke kumukūʻai-kūpono, Ke hana nei lākou i kahi kūpono no kahi pālahalaha nui o nā noi.

Waiwai	7075	6061	2024
Ikaika	ʻOi aku ka kiʻekiʻe	Loli	High
Ke kū'ē neiʻo Corrosionion	Loli	Kūpono	Loli
Markinpalibility	Kūpono	Maikaʻi loa	Loli
Wawahua	Paʻa	Kūpono	Paʻa
Kālā	High	Loli	High
Noi	AerERPPACE, Kauka	Peopleʻoihana Pūnaewele	AerERPPACE, aitompetitive

9. Nā Kūlana Aluminum 7075 ʻO Alloy e noho ana

7075 Loaʻaʻo Aluminim i kahi ākea ākea o nāʻano, ʻO ka hāʻawiʻana i ke hoʻololi no nā hana hana likeʻole a me nā noi.

Aia ma lalo nei nāʻano maʻamau loa i loaʻa kēia Alloy a me kā lākou hoʻohana maʻamau:

ʻAno	ʻO ka weheweheʻana	Nā noi maʻamau
'Ōpalapala	Kope, ʻO nā'āpana kūpono kūpono no nā mea kūpono.	Nā palapala pā o Aerospace, ʻO nā hana hoʻoikaika automotive.
Nā pahu	ʻO nā hiʻohiʻona cylidrical solidrical no ka machining.	Nā papahele, Pins, Nā mea paʻa, a me nā alterspace kūpono.
Nā papa	ʻO nā'āpana pā pōhaku i hoʻohanaʻia no nā'āpana koʻikoʻi.	Nā papa hana, Nā Kūlana Kūlana.
Nā'āpana	Kope, nā wahi ākea no nā hana māmā.	ʻIli wai, nā poponals, a me ka laka.
Nā Kuhi	Nā'āpana'āpana no kaʻokiʻana.	Nā'āpana uila, demirative trim.
Nā'ōpala	Paulo pihi.	Nā faile bicycle, ʻO nā'ōnaehana hoʻololi o Fluid.
Nā'āpana kiʻi	Nā'āpana-crostangular cross-cross.	Nā hana hana, nā'āpana automotive.
ʻOlua mau hua	Nā pākeke paʻa i nā noi nui.	ʻO nā cylinders hydraulic, Na'Āpanaʻo Aerospace.
Square Bar	Nā Kūlana Scad Square no ka hoʻohanaʻana i nā mea hoʻohana.	Nā wahi kūkulu, nā brackets, a me nā hui.
Hexagon Bar	ʻO Hexagonal Shapes no nā mea paʻa kūikawā.	Nā bolts, Nā Kahu, a me nā'āpanaʻenehana.
Channels	U-shaped Products no ke kākoʻo kākoʻo.	Hale kūʻai, ʻO Aerospace Robs.

10. Hopena

7075 ʻO Aluminim he alloy maikaʻi e hoʻohui i ka ikaika kiʻekiʻe, māmā māmā, a me nā waiwai maikaʻi loa.

Hāʻawi i kēlā me kēia helu makua i nā hiʻohiʻona kūikawā, aeʻae i nā meaʻenehana a me nā mea hana e koho i nā mea kūpono kūpono no kā lākou mau pono.

Ināʻoe e hana ana ma nā papahana aerospace, nā'āpana automotive, a iʻole nā ​​mea hana pāʻani hāmeʻa kiʻekiʻe, 7075 He kūpono kūponoʻo Aluminim.

Ma ka hoʻomaopopoʻana i kāna huiʻana, waiwai, a me nā hana hana lole, Hiki iāʻoe ke hoʻonui i kona hiki a hoʻokō i nā hopena koʻikoʻi i kāu mau papahana.

Manaʻo mākou ua hāʻawi kēia alakaʻi iāʻoe me kaʻike koʻikoʻi i loko o nā waiwai o 7075 aluminum.

Inā he mau nīnau kāu a iʻole nā ​​pono huahana huahana, lagona A hiki iā mākou. Hauʻoli hauʻoli!