Tel : +86 15333853330 (eward)

Email : [email protected]

356 Aluminum Sand Castings Foundry | LB Foundry

356 Aluminum Sand Castings. Aluminum alloy A356.0 and 356.0 are a 7% Si, 0.3% Mg alloy with 0.2 Fe (max) and 0.10 Zn (max). The alloys have very good casting and machining characteristics. Typically they are used in the heat-treated condition of T5 and T6 hardness properties.

Aluminum Alloy A356 T6 - Portable & Affordable - NewArc

Aluminum Alloy A356 T6 • Alloy A356 is a 7Si-0.3 Mg alloy with 0.2 Fe (max) and 0.10 Zn (max). The T6 heat treatment is a solution-anneal heat treat followed by a 320F aging. • Alloy A356 has greater elongation, higher strength and considerably higher ductility than Alloy 356. o A356 has improved mechanical properties because of lower iron

A356 Aluminum Casting | /a>

A356 aluminum casting alloy is a 7% Si, 0.3% Mg alloy with 0.2 Fe (max) and 0.10 Zn (max). A356 aluminum casting alloy has very good casting and machining characteristics. A356 aluminum casting alloy is used for aircraft parts, pump housings, impellers, high velocity blowers and structural castings where high strength is required. A356 aluminum ...

Aluminum A356.0-T6, Sand Cast

Composition information provided by the Aluminum Association and is not for design. Key Words: Aluminium A356.0-T6; UNS A13560; AAA356.0-T6. Comparable to JIS AC4CH-T6; AlA356.0-T6: Vendors: Protocast Inc is a Foundry and Machine Shop that works with Aluminum, Magnesium & Zinc. We specialize in quality, speed and precisely cast and machined ...

A356 Alloy Casting - Patriot Foundry

Aluminum, Brass & Bronze Sand Castings. Specifications, Applications, Properties, Techniques, Corrosion Resistance, Properties, and Enineering.

a356- Aluminum/Al foil,plate/sheet,aluminum alloy manufacturer

LB Foundry provides 356 aluminum sand castings. A356 aluminum has very good casting and machining properties and typically used in the heat-treated condition. Chat Now Send Inquiry; Aluminum Alloy( A356 ) - Shanghai Metals Market. SMM provides the latest prices for A356 Aluminum, price charts for the past five years as well as news and analysis ...

A356.0 ALUMINIUM CASTING ALLOY (7Si-0.3Mg)

A356.0 ALUMINIUM CASTING ALLOY (7Si-0.3Mg) Mass Characteristics Density. 2.685 g/cm_ (0.097 lb/in_) at 20ºC (68ºF) Thermal Properties Liquidus temperature. 615ºC (1135ºF) Solidus temperature. 555ºC (1035ºF) Coefficient of linear thermal expansion. Temperature range Average coefficient

Aluminum Alloy A356 T6 - sfsa.org

Aluminum Alloy A356 T6. Alloy A356 is a 7Si-0.3 Mg alloy with 0.2 Fe (max) and 0.10 Zn (max). The T6 heat treatment is a solution-anneal heat treat followed by a 320F aging. Alloy A356 has greater elongation, higher strength and considerably higher ductility than Alloy 356. ...

a356- Aluminum/Al foil,plate/sheet,aluminum alloy manufacturer

A356 aluminum has very good casting and machining properties and typically used in the heat-treated condition. Chat Now Send Inquiry; Aluminum Alloy( A356 ) - Shanghai Metals Market. SMM provides the latest prices for A356 Aluminum, price charts for the past five years as well as news and analysis for Aluminium A356 Alloy market.

A356.0 Aluminum Silicon Magnesium Technical Data Sheet

Aluminum, Brass & Bronze Sand Castings. Specifications, Applications, Properties, Techniques, Corrosion Resistance, Properties, and Enineering.

Aluminum A356.0-T6, Sand Cast

Aluminium A356.0-T6; UNS A13560; AAA356.0-T6. Comparable to JIS AC4CH-T6; AlA356.0-T6, Data points with the AA note have been provided by the Aluminum …

6061-T6 Aluminum vs. A356.0 Aluminum :: MakeItFrom.com

Both 6061-T6 aluminum and A356.0 aluminum are aluminum alloys. They have a moderately high 94% of their average alloy composition in common. There are 29 …

a356 aluminum properties- Aluminum/Al foil,plate/sheet ...

a356 aluminum properties . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

A356 T6 | Investment Casting Alloy | Casting Material

A356 T6 is an aluminum based investment casting alloy. Click here to read more.

Aluminium alloy - Wikipedia

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc.There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable.

Aluminum Alloy A356 | McMaster-Carr

Air is injected into the casting of this A356 aluminum to reduce weight and create a crater-like appearance. These foam sheets are often used for sound insulation and architectural facades. Carbide- or diamond-tipped blades are required for machining.

A356 Aluminum Foundry & Other Aluminum Alloys for Casting

Cast Aluminum Alloys A356 & 355 Aluminum Castings. Alcast Company is primarily an A356 permanent mold aluminum foundry, but we have various applications cast with aluminum alloy 355.Feel free to Contact Us to see if we can help meet your A356 or 355 aluminum casting needs.

Heat Treatment of A356 Aluminum Castings to T5 and T6

Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness Aluminum Foundry Heat Treatment Process. Our combination of modern heat treatment equipment and experienced aluminum foundry personnel work together to provide the precise temperatures and the quick quench needed for controlled and effective heat treat of our A356 aluminum castings.Through the use of five separate …

Aluminum Workshop: Matching filler alloys with A356

Mar 16, 2015· A: Alloy 356 and its variants (A356, B356, C356) is an aluminum-silicon-magnesium (AISiMg) alloy containing about 7 percent silicon and 0.35 percent magnesium. It is heat-treatable in the same manner as 6XXX wrought alloys and is most often supplied in the T6 temper. In fact, A356 is the most commonly used aluminum casting alloy.

Aluminum Alloy Selection | Premier Aluminum

Premier casts the following aluminum alloys: 319, 333, 354, 355, 356, A356, 357, 360, 380, 535 and 852. Chemical Composition Limits – Castings

Aluminum Alloys Refer to ASTM Specification B26/B26M-09 ...

A356.0-T6 34 24 3.5 80 26 8.5 535.0-F 35 18 9.0 70 34 8 10-12 713.0* 32 22 3.0 75 26 9 3 * After 21 days natural aging F=as cast, T51=cooled from an elevated temperature and artificially aged, T6=solution heat treated and then artificially aged Charasteristics- Aluminum Alloys ANSI Alloy # Fluidity Polishing 319 2 2 2 2 Yes 3 3 4 2 4 3 3 2

Evaluation of a New High Temperature Cast Aluminum for ...

used cast aluminum alloys are A356, 319 and AS7GU (A356+0.5%Cu).1 The A356 alloy is a primary aluminum alloy with good ductility and fatigue properties at low to intermediate temperatures. However, above approximately 200C (392F), creep resistance and tensile strength of …

Aluminum 356.0 -T51, Sand Cast

Material Notes: Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Composition Notes : If iron exceeds 0.45%, manganese content shall not be less than one -half iron content. Composition information provided by the Aluminum Association and is …

Global Aluminum Alloy Conversion Chart - MES, Inc.

Global Aluminum Alloy Conversion Chart UK ISO France Germany Italy UNI USA USA Japan End Uses AA / ASTM SAE LM0 AL 99.5 - A5 - 3950 150 - - Electrical, food, chemical plant LM2 AL-Si10Cu2Fe 46100 A-S9U3-Y4 - 5076 384 383 ADC12 Pressure Diecasting LM4 Al-Si5Cu3 4500 A-S5Ue G-AlSi6Cu4 (225) 3052 319 326 AC2A Sand gravity diecast manifolds, gear ...

Impact Properties of A356-T6 Alloys

Impact Properties of A356-T6 Alloys S. Shivkumar, L. Wang, and C. Keller The Charpy impact energy of A356 alloys has been measured. Instrumented Charpy impact tests have been conducted at 25, 100, 150, and 200 ~ The Charpy specimens were machined from plate castings or tapered cylindrical castings.

Aluminum Industry Standards | The Aluminum Association

For more than 60 years, the Aluminum Association has worked with the industry to develop and maintain technical standards for aluminum production. From designating alloys to answering technical questions to engaging with the academic community, the Association’s Standards & Technology Department creates the backbone of a vital communication ...

Aluminum A356 Price, 2020 Aluminum A356 Price ...

Aluminum A356 Price - Select 2020 high quality Aluminum A356 Price products in best price from certified Chinese Aluminum Box manufacturers, Aluminum Machinery suppliers, wholesalers and factory on Made-in-China.com

Alloy A356 / Aluminium Welding Alloy A356

Aluminium Welding Alloy A356 AircraftMaterialsUK.com Ltd +44 (0)1494 484844 - Global Supplier of European and U.S. Alloys

A356 T6 Aluminum, A356 T6 Aluminum Suppliers and ...

Alibaba.com offers 1,454 a356 t6 aluminum products. About 58% of these are casting, 2% are machining, and 1% are aluminum profiles. A wide variety of a356 t6 aluminum options are available to you, such as door & window, decorations, and transportation tools.

Aluminum 356 Ingot - Budget Casting Supply

Aluminum: A356. Aluminum Alloy A356 is the "industry standard" for casting aluminum. This is a versatile alloy has average machining properties and can be heat treated. It contains approx. 7% Silicon and 0.3% magnesium, the balance being aluminum. Good choice for …