Tel : +86 15333853330 (eward)

Email : [email protected]

AISI 4130 Alloy Steel (UNS G41300) - Materials Engineering

Forging of AISI 4130 steel can be performed at 954 to 1204°C (1750 to 2200°F). Hot working of AISI 4130 steel can be done at 816 to 1093°C (1500 to 2000°F). AISI 4130 steel can be cold worked using conventional methods. AISI 4130 steel can be annealed at 843°C (1550°F) followed by …

AISI 4130 Steel | 25CrMo4 | 1.7218 | 708A25 | SCM430 ...

AISI/SAE 4130 steel grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 315º C (600º F). It shows good overall combinations of strength, toughness and fatigue strength. As one of leading supplier of 4130 steel alloy material, Otai is reliable in 4130 round bar and steel plate materials.

SAE AISI 4130 Chromoly Steel, Alloy Material Properties ...

AISI 4130 Chromoly Steel (UNS G41300) AISI 4130 steel (UNS G41300), also known as 4130 Chromoly steel, is a chrome-molybdenum series low alloy steel with high strength, toughness and hardenability, usually used in quenched and tempered condition.

4130 Steel Properties and Applications | EngineeringClicks

SAE-AISI 4130 steel is an alloy steel formulated for primary forming into wrought products. 4130 is the designation in both the SAE and AISI systems for this material. G41300 is the UNS number. The properties of SAE-AISI 4130 steel include four common variations. This page shows summary ranges across all of them.

AISI 4130 Alloy Steel - West Yorkshire Steel

AISI 4130 Alloy Steel AISI 4130 steel stockholders and suppliers, delivering to the whole of the UK. AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRc. With a lower carbon content range AISI 4130 provides better

4130 vs 4140 Steel Comparison | Capital Steel & Wire

The following is a comparison of 4130 grade steel and 4140 grade steel. This information may be useful for machining purposes and as a resource for purchasing 4130 and 4140 steel. Chemical Properties The chemical properties of 4130 and 4140 steel are similar aside …

4130 Mechanical Properties - AISI 4130 fittings

Aisi 4130 chemical composition, AISI, AISI 4, AISI 4140, AISI 4130, AISI 420, AISI 410, AISI 4140 Properties, AISI 4150, AISI 4130 Properties, AISI 4135, AISI 4130 ...

AISI 4130 Alloy Steel - 4130 Steel Forgings | All Metals ...

They have 69% of their average alloy composition in common. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. For each property being compared, the top bar is AISI 316 stainless steel and the bottom bar is annealed SAE-AISI 4130.

AISI 4130 steel

This page cover the AISI 4130 chemical element, Mechanical Properties, AISI 4130 Datasheet, Cross Reference of AISI 4130 steel, Mainly used for .

Differences Between Normalized and Annealed 4130 Steel ...

AISI 4130 steel has a specialized chemical composition that gives it a unique set of properties. The steel has a carbon content between 0.28 and 0.33 percent, a chromium content between 0.8 and 1.1 percent, manganese content between 0.7 and 0.9 percent, molybdenum between 0.15 and 0.25 percent and a silicon content between 0.15 and 0.35 percent.

4130 vs 4340 Steel Comparison | Capital Steel & Wire

4130 and 4340 are both popular steel grades at Capital Steel & Wire. Below is a chemical and mechanical properties comparison of both grades of steel as it may be of value for machining purposes and as a resource for purchasing 4130 and 4340 steel.

eFunda: Properties of Alloy Steel AISI 4130

eFunda: Properties of Alloy Steel AISI 4130. Alloy Steel AISI 4130 Directory | ... Materials » Alloys » Steel » Stainless Steel » AISI Type 429. Materials » Alloys » Aluminum Alloy » Wrought » AA 4032. Materials » Alloys » Steel » Alloy Steel » AISI 51B60H.

4130 (E4130) Alloy Steel, AISI 4130 (E4130), Sheet, Plate ...

Representing only prime stock from world class mills, all our 4130 Alloy AQ steel is certified to Aerospace Material Specifications (mill certification available upon request). See more details about our 4130 chromoly steel stock including 4130 plate, 4130 sheet, 4130 round bar and 4130 …

AISI 4130 Aircraft Steel (AMS 6345 / AMS 6346 / AMS 6350)

Alloy 4130 is a widely used Aircraft Steel due to its weldability, ease of fabrication and mild hardenability. The hardenability and weldability of Alloy 4130 are considered equivalent to 8630 (MIL-S-6250) . Alloy 4130 is also vacuum degassed to meet the magnetic particle inspection standards of AMS 2301. Typical Mechanical Properties

AISI 4130 Steel - West Yorkshire Steel

AISI 4130 steel stockholders and suppliers, delivering to the whole of the UK. AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRc.

cold-roll-steel 4130 Product Guide from Online Metals

Offers good strength, and weldability without compromising steel abrasion and impact resistance. Easy to machine and hot work as well as cold work in the annealed state, it becomes significantly more challenging once the steel is hardened. 4130 steel can also be easily welded.

ASM Material Data Sheet

AISI 4130 Steel, normalized at 870°C (1600°F) Subcategory: AISI 4000 Series Steel; Ferrous Metal; Low Alloy Steel; Medium Carbon Steel; Metal Key Words: alloy steels, UNS G41300, AMS 6350, AMS 6356, AMS 6360, AMS 6361, AMS 6372, AMS 6370, AMS 6371, AMS 6373, ASTM A322, ASTM A331, ASTM A505, ASTM A513, ASTM A519, ASTM A646, JIS SCM 2, JIS SCCrM 1, SS14 2225 (Sweden), B.S. …

AISI 4140 Alloy Steel (UNS G41400) - Materials Engineering

Alloy steels are designated by AISI four-digit numbers and comprise different kinds of steels, each with a composition which exceeds the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va set for carbon steels. AISI 4140 alloy steel is a chromium-, molybdenum-, and manganese-containing low alloy steel ...

4130HW Alloy Steel

hardness and post-temper properties. Micro-alloying additions are made to increase temper resistance and provide grain-size control. The fine grain structure enhances toughness at all strength levels. 4130HW is produced using the electric arc-furnace method. After the melting process, the molten steel is

AISI 4130 - Howco

Low alloy 4130:ASTM A29 (VO1.05) General scope. AISI 4130 low alloy steel containing nominally 0.3% Carbon, 1% Chromium and 0.2% Molybdenum is widely used in oil patch applications. It is similar to 4140 which has a higher carbon level giving 4130 improved weldability, at …

AISI 4130 steel

This page cover the AISI 4130 chemical element, Mechanical Properties, AISI 4130 Datasheet, Cross Reference of AISI 4130 steel, Mainly used for .

ASM Material Data Sheet

AISI 4130 Steel, normalized at 870°C (1600°F) Subcategory: AISI 4000 Series Steel; Ferrous Metal; Low Alloy Steel; Medium Carbon Steel; Metal Key Words: alloy steels, UNS G41300, AMS 6350, AMS 6356, AMS 6360, AMS 6361, AMS 6372, AMS 6370, AMS 6371, AMS 6373, ASTM A322, ASTM A331, ASTM A505, ASTM A513, ASTM A519, ASTM A646, JIS SCM 2, JIS SCCrM 1, SS14 2225 (Sweden), B.S. …

AISI 4130 - Howco

Low alloy 4130:ASTM A29 (VO1.05) General scope. AISI 4130 low alloy steel containing nominally 0.3% Carbon, 1% Chromium and 0.2% Molybdenum is widely used in oil patch applications. It is similar to 4140 which has a higher carbon level giving 4130 improved weldability, at …

AISI 4130 Alloy Steel - West Yorkshire Steel

AISI 4130 Alloy Steel AISI 4130 steel stockholders and suppliers, delivering to the whole of the UK. AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRc. With a lower carbon content range AISI 4130 provides better

4130 Alloy Steel, Alloy 4130 Steel, AISI 4130, UNS G41300 ...

* All Trademarks and/or Trade names are the properties of their respective owners. California Metal & Supply is a leading supplier of quality 4130 Alloy Steel Sheet, 4130 Alloy Steel Bar, and 4130 Alloy Steel Plate. Alloy 4130 (AISI 4130) is a chromium molybdenum alloy steel.

Production and Uses of 4130 Alloy Steel

It is a low alloy material and best for welding purpose and widely used in the resistance welding process. It has great features so that it is best for machining process such as annealing and normalizing. Composition of 4130 alloy. This is an alloy of steel that contains alloying material …

4130 Chromoly Tubing | Round Chromoly 4130 Tubing ...

Round steel tube 4130 provides good weldability without compromising steel abrasion and impact resistance. It is also sturdy yet lightweight for use in applications requiring strength without additional weight. These properties make the material ideal for use in structural applications, including gears, fasteners, and welded tubing.

4130 Steel | 4130 Round Bar | 4130 Flat Bar Supplier ...

With a nominal carbon content of 0.30% this alloy is excellent for fusion weldability. 4130 can also be hardened through heat treatment. 4130 can increase its wear quality through nitriding. 8630 and 4130 have similar properties. 4130 is known as a Chrome-Moly alloy. In addition alloy 4130 is stocked in a normalized, quench and tempered conditions.

41xx steel - Wikipedia

41xx steel is a family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, cro-moly, CrMo, CRMO, CR-MOLY, and similar).

Section R

Properties shown are the averages of three heats, selected so that the significant elements are in the middle of the chemical composition limits and incidental elements are at a minimum. Quenched-and-tempered properties are based on treating a 1” round, which …

Detail - Hobart Brothers Performance Welding Products

Thicker materials are commonly stress-relieved at 1,100 to 1,250 degrees Fahrenheit for approximately one hour per inch of base material thickness. Keys to success As with the welding of any material, knowing the basics about filler metal selection and material properties can help make welding 4130 …

Alloy - Encore Metals - EN30B

EN30B - BS 970 GRADE 835M30 BAR a 4 ¼% Nickel-Chromium-Molybdenum Alloy Steel: Typical Analysis

AISI 4130 Steel, water quenched 855°C (1570°F), 595°C ...

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.

4130 | ALLOY | In Stock | Castle Metals Site

Alloy 4130 is a chrome-moly alloy. It is very popular for welding applications and is often used in the normalized condition without further heat treatment. It can be nitrided to enhance its wear quality. Its popularity is primarily due to its weldability, hardenability, and machinability. Alloy 4130 contains similar properties as Alloy 8630.