Tel : +86 15333853330 (eward)

Email : [email protected]

Stainless Steel - Grade 316L - Properties, Fabrication and ...

316 1.4401 316L 1.4404 Mechanical Properties Room Temperature Tensile Properties Minimum mechanical properties for annealed Alloys 316, 316L and 317L austenitic stainless steel as required by ASTM specifications ASTM A213 and ASME specification SA-213 are shown below.

316/316L Stainless Steel | AK Steel

316/316L STAINLESS STEEL TYPE 316 is widely used in applications requiring corrosion resistance superior to Type 304, or good elevated temperature strength. Typical uses include exhaust manifolds, furnace parts, heat exchangers,

316 Stainless Steel Mechanical Properties | E-Z LOK

Learn more about the mechanical properties of the 316 stainless steel materials we use in our threaded insert products.

AISI 316 vs 316L Stainless Steel, Difference of SS316 ...

AISI 316 vs 316L Stainless Steel (UNS S31603) Both AISI 316 vs 316L stainless steel are molybdenum (Mo) containing austenitic stainless steel grades. The main difference between 316 and 316L stainless steel is the level of carbon content, weldability, corrosion resistance and mechanical properties.

Stainless 316, 316L, 317, 317L - Specialty Stainless Steel ...

Mechanical Properties Minimum mechanical properties for annealed Types 316, 316L, 317 and 317L austenitic stainless steel plate, sheet and strip as required by ASTM specifications A240 and ASME specification SA-240, are shown below.

316 and 316L Stainless Steel Sheet, Coil & Bar - AMS 5524 ...

316 / 316L are austenitic stainless steels that contain molybdenum, which increases their resistance to many chemical corrodents and marine environments. 316L is an extra low carbon version of 316 stainless steel. These materials are more resistant to general corrosion and pitting/crevices than conventional austenitic stainless steels.

Stainless Steel Alloy 316/316L Specifications: UNS S31600 ...

General Properties. Alloy 316/316L is molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments.

Grade AISI 316 Stainless Steel, SS316 (UNS S31600 ...

ASTM AISI 316 stainless steel (UNS S31600) is one of the most widely used austenitic stainless steels. Due to the addition of Molybdenum (Mo), SS316 has a great improvement in corrosion resistance and certain properties. 316L stainless steel (UNS S31603) is the low carbon version of AISI 316.

Specification Sheet: Alloy 316/316L

It is common practice for 316L to be dual certified as 316 and 316L. The low carbon chemistry of 316L combined with an addition of nitrogen enables 316L to meet the mechanical properties of 316. Alloy 316/316L resists atmospheric corrosion, as well as, moderately oxidizing and reducing environments. It also resists corrosion in polluted

Stainless Steel - Grade 316 (UNS S31600)

Sep 13, 2001· This machines significantly better than standard 316 or 316L, giving higher machining rates and lower tool wear in many operations. Dual Certification. It is common for 316 and 316L to be stocked in "Dual Certified" form - mainly in plate and pipe. These items have chemical and mechanical properties complying with both 316 and 316L specifications.

Stainless Steel: Tables of Technical Properties

Euro Inox makes the following tables of technical properties available: • Chemical composition of stainless steels (flat products) • Mechanical properties of stainless steels (flat products) • Physical properties of stainless steels The attached collection of data reflects inquiries directed to stainless steel development associations.

Mechanical properties of Austenitic Stainless Steel 304L ...

In this work, two grades of Austenitic Stainless Steel are investigated, namely ASS 304L and ASS 316L. Their composition is given in Table 1.To extract the experimental data and to predict the mechanical properties, the tensile tests are conducted at three different strain rates (0.0001, 0.001 and 0.01 s −1) and temperatures ranging from 50 °C to 650 °C at an interval of 50 °C.

316 / 316L Stainless Steel Plate - ASTM A240 & ASME SA240 ...

316 / 316L stainless steel plates are part of the austenitic family of stainless steel and is the most widely used varieties of stainless plate. 316 grades contain a higher level of Nickel than 304 giving it an improved corrosion resistance over 304 grades. 316/316L plate is a good option for marine applications due to a good atmospheric corrosion resistance. 316L is a low carbon modification ...

Stainless Steel: Properties, Examples and Applications ...

Mechanical properties. As the term stainless steel encompasses a wide range of materials, the mechanical properties, of course, are quite diverse. In general, the values tested for include yield strength, tensile strength, ductility, hardness, toughness, creep resistance and fatigue resistance.

Stainless Steel - Austenitic - 1.4404 (316L) Bar and Section

1.4404 (316L) Bar and Section. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance. 316 stainless steel contains an addition of molybdenum that gives it improved corrosion resistance.

Grade 316 Stainless Steel Technical Data

Stainless Steel - Grade 316 Grade 316 / 316L Technical Data Summary. Grade 316 is an improved version of CS 304, with the addition of molybdenum and a slightly higher nickel content. The resultant composition of CS 316 gives the steel much increased corrosion …

Stainless Steel & Alloy Mechanical Properties | Best Stainless

Please contact Best Stainless for more information about the mechanical properties of stainless steel and alloy. With over 270 years of combined industry experience, Best Stainless can help you with all your stainless steel, nickel alloys, and PSQ material needs.

ASTM A269 TP 316 / 316L Stainless Steel Seamless Pipes ...

ASTM A269 TP 316 / 316L Stainless Steel Seamless Pipes and Tube Packing ASTM A269 TP 316 / 316L Stainless Steel Seamless Pipes and Tubes is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and ...

Stainless Steel: Properties, Examples and Applications ...

Mechanical properties. As the term stainless steel encompasses a wide range of materials, the mechanical properties, of course, are quite diverse. In general, the values tested for include yield strength, tensile strength, ductility, hardness, toughness, creep resistance and fatigue resistance.

Differences between 316 and 316L Stainless Steel | Penn ...

Jun 28, 2013· The L grade has a lower maximum carbon limit and the straight grade has increased mechanical properties. If material is certified as straight grade, the carbon content would have to be at a level of 0.030% maximum in order to be dual certified as 316L/316 grade. (presumably the mechanicals would have already been met).

316 / 316L - Rolled Alloys, Inc.

316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service.

Stainless Steel - Austenitic - 1.4404 (316L) Bar and Section

1.4404 (316L) Bar and Section. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance. 316 stainless steel contains an addition of molybdenum that gives it improved corrosion resistance.

3D printing with 316L stainless steel | Desktop Metal

316L is a molybdenum-bearing, fully-austenitic stainless steel. It’s known for its excellent corrosion resistance—for example, it's resistance to pitting corrosion—and mechanical properties at both high and low temperatures. 316L is a common material used in a wide variety of applications, including. Chemical and petrochemical processing

Alloy 316/316L Austenitic Stainless Steel Plate ...

It is common practice for 316L to be dual certified as 316 and 316L. The low carbon chemistry of 316L combined with an addition of nitrogen enables 316L to meet the mechanical properties of 316. Alloy 316/316L resists atmospheric corrosion, as well as, moderately oxidizing and reducing environments.

ASTM A312 TP 316 / 316L Stainless Steel Seamless Pipes ...

Very similar to Grade 316 in chemical composition and mechanical properties; 316 & 316L steel plate and pipes have common properties and are often stocked with Dual Certification, where it is determined that both have properties and composition which comply with both steel types.

Stainless Steel: Tables of Technical Properties

Euro Inox makes the following tables of technical properties available: • Chemical composition of stainless steels (flat products) • Mechanical properties of stainless steels (flat products) • Physical properties of stainless steels The attached collection of data reflects inquiries directed to stainless steel development associations.

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 Austenitic Stainless Steels ... 316L, 316H Improved resistance to pitting corrosion in chloride environments 321, ... Similar but not identical mechanical properties are specified in EN 10088.2 and JIS G4305

Stainless Steel & Alloy Mechanical Properties | Best Stainless

Please contact Best Stainless for more information about the mechanical properties of stainless steel and alloy. With over 270 years of combined industry experience, Best Stainless can help you with all your stainless steel, nickel alloys, and PSQ material needs.

Encore Metals - T-316, T-316L, T-316N

Stainless Steel T-316, T-316L, T-316N (UNS S31600, S31603, S31653) 18-12-3 Chromium-Nickel-Molybdenum austenitic stainless steel. Available in most forms & sheets, plates and coils to ASTM A240; bar sections to ASTM A276 & A479

SAE 316L stainless steel - Wikipedia

SAE 316L grade stainless steel, is sometimes referred to as A4 stainless steel or marine grade stainless steel. It is the second most common austenitic stainless steel after 304. Its primary alloying constituents after iron, are chromium (between 16–18%), nickel (10–12%) and molybdenum (2–3%).

316/316L Stainless Steel

316/316L Stainless Steel Type 316/316L Stainless Steel is a molybdenum steel possessing improved resistance to pitting by solutions containing chlorides and other halides. In addition, it provides excellent elevated temperature tensile, creep and stress-rupture strengths.