Tel : +86 15333853330 (eward)

Email : [email protected]

17-4 PH Stainless Steel Bar - 17-4 ASTM A564 Supplier ...

Our 17-4 PH Stainless Steel (SS) is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.

17-4 Stainless Steel Properties | KVA Stainless

17-4 - UNS S17400: Type 17-4 is the most common grade of martensitic precipitation hardenable (PH) alloys. 17-4 provides an outstanding combination of high strength, good mechanical properties at temperatures up to 600°F (316°C), and short-duration, low-temperature heat treatments that minimize warpage and scaling.

17-4 Stainless Steel | 630 Alloy

Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance. Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.

Alloy 17-4 PH Precipitation Hardening - Sandmeyer Steel

Alloy 17-4PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F /300°C), and corrosion resistance. Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.

MATERIAL DATASHEET 17-4 PH Stainless Steel

17-4 PH Stainless Steel MATERIAL DATASHEET Typical Mechanical Properties Standard Markforged H900 MIM H900 ASTM A564 H900 Ultimate Tensile Strength ASTM E8 1250 MPa 1190 MPa 1310 MPa 0.2% Yield Strength ASTM E8 1100 MPa 1090 MPa 1170 MPa Elongation at Break ASTM E8 6% 6% 10% Tensile Modulus ASTM E8 170 GPa 190 GPa 190 GPa

Stainless Steel AL 17-4™ Precipitation

AL 17-4 Precipitation Hardening Alloy is comparable to that of Type 304 stainless steel in most media. In gen-eral, the corrosion resistance of AL 17-4 alloy is supe-rior to that of the hardenable 400 series stainless steels. As with other precipitation hardening alloys, AL 17-4 Pre-cipitation Hardening Alloy is more susceptible to stress

17-4 PH Stainless Steel Sheet, Coil and Plate - AMS 5604 ...

17-4 PH is a martensitic, chromium-nickel-copper precipitation-hardening stainless steel. 17-4 PH stainless steel is capable of attaining a wide range of strength and toughness properties depending on the precipitation or aging temperature used in hardening.

STAINLESS STEEL

17-4 PH ® STAINLESS STEEL 3 17-4 PH Stainless Steel provides excellent mechanical properties. For applications requiring high strength and hardness plus corrosion resistance, this …

630 (17-4) Precipitation Hardening Stainless Steel Bar ...

630 (17-4) Precipitation Hardening Stainless Steel Bar 630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance. Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.), or the H1150 (H620) double aged ...

17-4 PH® Stainless Steel, UNS S17400 - Ulbrich

17-4 PH® Stainless Steel, UNS S17400 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire ASTM A564, ASTM 693, AMS 5523, AMS 5604, AMS 5643 17-4PH® Alloy Description 17-4 PH® is a martensitic, chromium-nickel-copper precipitation-hardening stainless steel that provides an

630 (17-4) Precipitation Hardening Stainless Steel Bar ...

630 (17-4) Precipitation Hardening Stainless Steel Bar 630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance. Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.), or the H1150 (H620) double aged ...

ALLOY 17-4 (ALLOY 630, UNS S17400 Spec Sheet | Penn ...

Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all ...

17-4 PH Bolts

17-4 PH bolts are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 stainless steel, 17-4 PH bolts yield strength is up over 4 times greater. When compared to Duplex 2205 bolts, the yield strength of 17-4 PH can be up to 2 ...

17-4 Stainless Steel Bar - 17-4PH CRES Condition A Round ...

17-4 Stainless Steel Bar 17-4 ph Stainless Steel Bar 17-4 is a chromium-nickel-copper precipitation hardening stainless steel used for applications requiring high strength …

AK Steel 17-4 PH® Precipitation Hardening Stainless Steel ...

UNS S17400, AK Steel 17-4 PH® provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time

Stainless 17-4 PH - United Performance Metals

often reducing costs. Type 17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, and good mechanical properties at temperatures up to 600°F (316°C).

17-4 PH STAINLESS STEEL - American Welding Society

When weld deposit is not required to have an equivalent strength level to that of the base material, type 308L stainless steel filler can be used. If 17-4 PH is welded to carbon or low alloy steel it is necassary to minimize dilution by appropriate welding technique (no weaving) to avoid hot cracks due to carbon content. Hope this helps ...

17-4 PH Stainless Steel | McMaster-Carr

High-Strength Corrosion-Resistant 17-4 PH Stainless Steel. High-Strength Corrosion-Resistant 17-4 PH Stainless Steel Rods and Discs. High-Strength Corrosion-Resistant 17-4 PH Stainless Steel Sheets, Bars, and Strips. Fasteners. Shim Stock. Cut this stock into custom shapes to fit your application.

Stainless Steel - Grade 17-4 (UNS S17400)

Grade 17-4 stainless steel can be cold worked using common techniques in spite of its high initial yield strength. Annealing. Grade 17-4 stainless steel is annealed at 1038°C (1900°F) for 0.5 h followed by cooling rapidly. Hardening. Grade 17-4 stainless steel has high ductility, and can be formed using all conventional techniques.

Specification Sheet: Alloy 17-4PH

Alloy 17-4PH (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished in the solution annealed condition (Condition A). It should not be used

Stainless Steel - Precipitation Hardening - 1.4542 (17/4 ...

It also contains 4% Copper and 0.3% Niobium. 17-4 PH is also known as stainless steel grade 630. The advantage of precipitation hardening steels is that they can be supplied in a “solution treated” condition, which is readily machinable. ... Strength Yield strengths for precipitation-hardening stainless steels are 515 to 1415 MPa. Tensile ...

7 Things you DID NOT know about 17-4 PH Stainless Steel

Type 17-4 PH stainless steel contains between 15-17.5% of chromium in its composition. In this regard, a seagoing vessel’s pump and valve parts are made of type 17-4 PH stainless steel. Most of the parts of that ship that you went on that annual cruise are made from type 17-4 PH stainless steel.

Alloy 17-4 H900 (Alloy 630, UNS S17400) stock available at ...

Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all ...

17-4 PH H1025 Precipitation Hardening Stainless Steel

Sep 10, 2015· Grade 17-4 stainless steel is the utmost extensively applied steel of the precipitation hardening grade steels. It has great toughness, high strength, and normal corrosion resistance. Precipitation hardening, also known as age hardening, is a heat treatment method utilized to augment the yield strength of this grade.

Alloy 17-4 H900 (Alloy 630, UNS S17400) stock available at ...

Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all ...

Get a Quote on 17-4PH Stainless Steel - Vincent Metals

We handle 17-4 PH in a wide variety of forms. Precipitation hardening stainless steels like 17-4PH offer the advantage of machining in the annealed condition. This decreases tool wear and machining time. After machining you can put your parts through an inexpensive heat treatment to get to the desired tensile strength.

17-4PH® Stainless Steel Available in Strip - UNS S17400 ...

17-4 PH Stainless Strip is the most widely used of all precipitation hardening stainless steels. It's a martensitic steel that combines high strength, corrosion resistance, impecable mechanical properties up to 600°F and good toughness. End use applications are within the aerospace, chemical, food processing, and metalworking industries.

17-4 Stainless Steel Bar - 17-4PH CRES Condition A Round ...

17-4 Stainless Steel Bar 17-4 ph Stainless Steel Bar 17-4 is a chromium-nickel-copper precipitation hardening stainless steel used for applications requiring high strength …

17-4 PH Stainless Steel | McMaster-Carr

High-Strength Corrosion-Resistant 17-4 PH Stainless Steel. High-Strength Corrosion-Resistant 17-4 PH Stainless Steel Rods and Discs. High-Strength Corrosion-Resistant 17-4 PH Stainless Steel Sheets, Bars, and Strips. Fasteners. Shim Stock. Cut this stock into custom shapes to fit your application.

17-4 PH STAINLESS STEEL - American Welding Society

When weld deposit is not required to have an equivalent strength level to that of the base material, type 308L stainless steel filler can be used. If 17-4 PH is welded to carbon or low alloy steel it is necassary to minimize dilution by appropriate welding technique (no weaving) to avoid hot cracks due to carbon content. Hope this helps ...

17-4 PH stainless steel | Desktop Metal

About the material. 17-4 PH is a martensitic precipitation - hardened stainless steel. It’s known for its corrosion resistance and high levels of strength and hardness, especially when heat treated. 17-4 can be heat treated to a variety of hardness and toughness levels, allowing users to customize post-sintering properties of the alloy to suit a wide variety of applications, including:

ALLOY 1.4542 / 17-4 PH - Sverdrup Steel - Your Material ...

17-4 PH is a martensitic precipitation hardening stainless steel with additions of copper (Cu), niobium (Nb) and tantalum (Ta). The grade combines high strength and hardness values with moderate corrosion resistance. Different heat treatment temperatures can optimize mechanical properties, e.g. yield strength at 1100 – 1300MPa.

Stainless Steel 17-4 H1100 - Metal Alloys

Stainless Steel 17-4 H1100 is a precipitation-hardening martensitic Stainless Steel, which has corrosion resistance comparable to austenitic varieties. Our H1100 has been heat treated to a minimum tensile strength of 140ksi, a yield strength of 115ksi, an elongation in 2in of 14% and a reduction of area of 45%. Cobalt is reported in the chemistry.

Stainless Steel Grade 17-4 (UNS S17400)

Stainless steel grade 17-4 is a widely used precipitation hardening grade. Although soft and pliable in the solution annealed condition, it possesses good properties with a single precipitation or aging treatment. This material has high harness, good corrosion resistance, toughness, strength, and ...

17-4PH / 1.4542 / S17400 - Stainless Steel - Precipitation ...

INTOCO UK and Europe - 17-4PH / 17/4PH / UNS S17400 / 1.4542 / 1.4548 / AISI 630 Martensitic Precipitation Hardening stainless steel. Intoco, a UK based manufacturing company, specialise in 'no-compromise' manufacture using state of the art CNC equipment, and the finest steels available.

17-4 PH (as sintered) Stainless Steel - MIM Materials

MIM-17-4 PH (as sintered) MIM 17-4 PH (precipitation hardening grade) of stainless steel offers a good balance between corrosion resistance and strength. It is magnetic and hardenable to various strength levels by varying the aging heat-treating temperature. It generally has better corrosion resistance than the 400 series stainless steels ...

1.4548 (17-4 PH®), S17400 | Datasheet | METALCOR

1.4542 / AISI 630 / 17-4PH® is a martensitic chromium-nickel-stainless steel, stabilized with niobium. | Martensitic precipitation hardenable chromium-nickel-copper steel possessing high strength and toughness. Further strength increments can be obtained by cold forming, followed by a precipitation hardening treatment.

17-4PH Stainless Steel - West Yorkshire Steel

Steel are suppliers of 17-4PH stainless steel round bar and flat bar. 17-4PH is a corrosion resistant grade which is soft and ductile in the solution annealed condition. Medium to high strength, good toughness and strength is obtained by the appropriate ageing treatment. As a martensitic precipitation hardening stainless it is